1APBS00628-VW Golf Jetta Audi TT Front & Rear Ceramic Performance Brake Pad & Rotor Kit

Replaces

VW Golf Jetta Audi TT Front & Rear Ceramic Performance Brake Pad & Rotor Kit

1APBS00628

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Venting Type: Vented
  • Front Brake Rotor Diameter: 12.28 in. (312mm)
  • Rear Brake Rotor Venting Type: Vented
  • Wheel Lug Count: 5 Lug
  • Rear Brake Rotor Diameter: 10.08 in. (256mm)
  • Product Line: Performance
FREE SAME DAY SHIPPING
Save 21%
List: $232.95 Save: $48.00
Part 1APBS00628

Out of Stock

Free GROUND SHIPPING

Close



DIY Solutions
Brand #: BFS02872
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Rear Brake Rotor Venting Type:   Vented
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   12.28 in. (312mm)
  • Front Brake Rotor Venting Type:   Vented
  • Rear Brake Rotor Diameter:   10.08 in. (256mm)
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

True Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:48)
    • Remove the lug nut covers with a 7mm Allen Wrench
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel will not come off, thread one lug nut and use a pry bar to loosen the wheel
  2. step : Inspecting the Brakes (1:54)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:04)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (2:39)
    • Remove the two 8mm Allen bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips head screw from the rotor
    • If the screw will not remove, drill it out
    • Pull the rotor off
  5. step : Preparing the New Brakes (3:17)
    • Put a large C-clamp on to the brake caliper
    • Apply pressure to the brake piston
    • Twist the piston in with slip joint pliers and adjust the C-clamp to maintain pressure
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Clean the brake pad slides with a wire brush
    • Check the caliper slides for smooth movement
    • If the caliper slides do not move smoothly, clean them and apply grease
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  6. step : Installing the New Brake Rotor (4:54)
    • Slide the rotor on
    • Insert the Phillips screw into the brake rotor
    • Put the bracket back into place
    • Start the two 8mm Allen bolts by hand
    • Tighten the bolts to 50 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:42)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the two 13mm bolts
  8. step : Reattaching the Wheel (6:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Remove the lug nut key
    • Put on the lug nut caps
  9. step : Testing the Brakes (6:55)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Hex Wrenches

  • 7mm Allen Wrench
  • 8mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
So this does have the front of wear sensor attached even though it’s not pictured on the pad ? I need to make sure it comes attached before I buy
Brandon J December 31, 2019
The brake pad wear sensors are not included within this kit. Please do not hesitate to contact us with any further questions.
Emma F January 2, 2020
Pad wear sensor ?
Brandon J December 31, 2019
The brake pad wear sensors are not included within this kit. Please do not hesitate to contact us with any further questions.
Emma F January 2, 2020

Fits the following Makes:

Year Make Model Description
2000-2006Audi TT Audi TT L4 1.8L Turbo Front Wheel Drive with Front Female Oval Pad Wear Sensor Connector with Heavy Duty Brakes Front & Rear Ceramic Performance Brake Pad & Rotor Kit
2002-2003Volkswagen Golf VW Golf L4 1.8L Turbo with Front Female Oval Pad Wear Sensor Connector with Heavy Duty Brakes Front & Rear Ceramic Performance Brake Pad & Rotor Kit
2004-2005Volkswagen Jetta VW Jetta with Front Female Oval Pad Wear Sensor Connector with Heavy Duty Brakes Front & Rear Ceramic Performance Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 34222
Aimco 34193
Bendix PRT5418
Bendix PRT5830
DuraGo BR34193
DuraGo BR34222
Raybestos EHT340H
Raybestos EHT687
Raybestos Brakes EHT687
Raybestos Brakes EHT340H
Raybestos Brakes 980004
Raybestos Brakes 980131
Wagner BD126462
Wagner BD126241
Wagner BD180021

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BFS02872
Product Reviews
4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
brake kit
Great price, fast shipping and a perfect fit! Very satisfied with my brake kit purchase!
April 9, 2018
Affordable solution!
Ive never heard of the manufacturer of these parts, but that doesnt mean much. Ive heard horror stories of people spending hundreds, even thousands on "Name brand" brake upgrade kits only to be disappointed a few months later. Ive only had these a couple weeks, so well see what happens with time. The parts arrived on time and were a direct fit with no issues. So far Im impressed with how quiet these brakes are as well as how much noticeably cleaner my wheels are staying. Driving feels much better over all having replaced the worn brakes that came on the car when I bought it just recently - I also just ordered new control arms & ball joints from 1A as well, which I anticipate will be of similar quality.
October 9, 2018
Good product for price
4 stars they do their job they stop the car , I feel like they do not have best stopping power but for the price they are good. They make the car look super good. Fitted them on my 05 gli the other ones posted for 1.8t Jetta do not fit gli trim, so i ordered Audi TT ones
July 29, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


VW Golf Jetta Audi TT Front & Rear Ceramic Performance Brake Pad & Rotor Kit-1APBS00628 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.