Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:52)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:07)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 19 mm caliper bracket bolts.
    • Remove the rotor and pop the plug out of the rotor.
  3. step : Install the new disc brakes (2:07)
    • Hit the emergency brake with brake cleaner.
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle and replace the little access plug.
    • Mount the caliper bracket and torque the 19 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 25 ft lbs.
  4. step : Mount the wheel (4:39)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket
  • 19mm Socket
  • 21mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2004 Infiniti G35 without Brembo Calipers Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
  • 2003-2005 Nissan 350Z without Brembo Calipers Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit

This part replaces:

  • Reference Number CD905
  • Reference Number CD815
  • Reference Number 31350
  • Reference Number 31349
Only 2 left in stock
Part #: 1APBS01122



How-to Video:

(05:32 min)