1APBS00971-Chevrolet Pontiac Olds Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
false

Replaces

Chevrolet Pontiac Olds Front Ceramic Performance Brake Pad & Rotor Kit with Calipers DIY Solutions

97-03 Chevy Malibu NEW Front Brake Caliper, Ceramic Pad & Peformance Rotor Kit
$ 224.95
$356.95
37% OFF
$356.95
37% OFF
FREE SAME DAY SHIPPING
DIY Solutions
Part 1APBS00971

Out of Stock

Free GROUND SHIPPING

Close



Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Wheel Lug Count:   5 Lug
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Front Brake Rotor Diameter:   10.94 in. (278mm)
  • Brake Rotor Coating:   Premium G-Coated
  • Front Brake Rotor Venting Type:   Vented
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Front Brake Calipers
  • Product Line:   Performance

Premium Positive Molded Brake Pads Features and Benefits

  • Same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims & pad chamfering provide smooth & quite braking

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Performance Brake Kit Features and Benefits
  • Longer life - Positive molded to ensure even wear and enhanced performance
  • Less dust - Cleaner, quieter, smoother, includes 3 layer OE-grade shims
  • Better stopping power - Cross-drilled and slotted to reduce brake fade
  • Durable - True non-interference vane design for structural integrity and cooling

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories.

How to Replace Brake Kit 99-04 Oldsmobile Alero

Created on: 2012-02-11

Check out this detailed video showing you how to do a front brake job on a 99-04 Oldsmobile Alero.

  1. step 1 : Removing the Wheel
    • Remove the lug nut covers
    •  
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step 2 : Removing the Brake Pads
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Remove two 12mm bolts from the brake caliper
    • Push the caliper pistons in using a large C-clamp on the brake pad
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Clean the slides with a wire brush
  3. step 3 : Inspecting the Brakes
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  4. step 4 : Removing the Brake Rotor
    • Remove two 13mm bolts from the brake caliper bracket with a breaker bar or a ratchet and pipe
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step 5 : Installing the New Brake Rotor
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
    • Clean the brake pad slides with a wire brush
    • Put the bracket back into place, start the 13mm bolts by hand
    • Tighten the 13mm bolts to 65 foot-pounds of torque
  6. step 6 : Installing the New Brake Pads
    • Install the new brake pads into the bracket with the tab on the rear side
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten the 12mm bolts to between 15-18 foot-pounds
    • Unthread the place-holder lug nut
  7. step 7 : Reattaching the Wheel
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90-100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap, aligning the valve stem
    • Reattach the lug nut covers
  8. step 8 : Testing the Brakes
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement

  • General Tools

    Large C-Clamp

    Jack Stands

    Wire Brush

    Floor Jack

  • Ratchets & Related

    A Piece of Pipe (for leverage)

    Socket Extensions

    Torque Wrench

    Ratchet

    1/2 Inch Breaker Bar

  • Sockets - Metric

    12mm Socket

    13mm Socket

    19mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2004-2005Chevrolet Classic Chevrolet Classic Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
1997-2003Chevrolet Malibu Chevrolet Malibu Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
1999-2004Oldsmobile Alero Olds Alero Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
1997Oldsmobile Cutlass Olds Cutlass Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
1998-1999Oldsmobile Cutlass Olds Cutlass Front Ceramic Performance Brake Pad & Rotor Kit with Calipers
1999-2005Pontiac Grand Am Pontiac Grand Am Front Ceramic Performance Brake Pad & Rotor Kit with Calipers

Part Interchange

Brand Label Part Number
Aimco 55040
Bendix PRT5158
Cardone Reman 18-B4646
Cardone Reman 18-B4647
DIY Solutions BFS01956
DIY Solutions BFS02353
DIY Solutions BFS02352
DuraGo BR55040
FMSI CD727
Raybestos MGD727CH
Raybestos EHT727H
Raybestos Brakes MGD727CH
Raybestos Brakes EHT727H
Raybestos Brakes 56655
Wagner BD125522

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Enter Vehicle Year Make Model

Not all parts are the perfect fit. Enter your Vehicle and we'll confirm fit, or help get you to one that will.

Chevrolet Pontiac Olds Front Ceramic Performance Brake Pad & Rotor Kit with Calipers DIY Solutions-1APBS00971 does not fit your:

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

If your vehicle isn't listed, search Brake Kits

This part will only fit a vehicle with these options.

If your option isn't listed search Brake Kits