This replacement mirror is just what you need to get your vehicle in good working form again!

Specifications:

  • Fits LH (Driver Side)
  • Power operation
  • Smooth Black Finish
    • can be painted to match by buyer or installed as is
  • Direct replacement
  • Built to strict quality control standards

This mirror makes a good replacement and has good cost savings over a dealer mirror.

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Special Note:

  • Unless otherwise noted, replacement mirrors will only work properly on vehicles with the exact same options. If your vehicle does not have the options listed in specifications, the mirror(s) may not function properly.

Part Details

  • Mirror Color / Finish: Smooth Black - Paint to Match
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:29)
    • Pull up on the tab in the pull handle cup.
    • Remove the circular panel behind the door handle.
    • Remove the three T30 Torx screws.
    • Pry out the pin on the side of the door panel.
    • Using a putty knife find the clips behind the door panel and pry out on the clips.
    • Disconnect the harness and handle rod from the back of the door panel.
  2. step : Removing the Side Mirror (3:01)
    • Pull down the shield and disconnect the mirror harness.
    • Remove the three 10mm bolts from the side mirror.
    • Pull the side mirror free.
  3. step : Reinstalling the Side Mirror (3:41)
    • Pull the mirror harness through the door.
    • Line up the mirror and push it into place.
    • Replace the three 10mm bolts.
  4. step : Replacing the Door Panel (4:57)
    • Reconnect the harness and door handle rod on the back of the door panel.
    • Line the door panel up and push it down and push in all the clips along the door panel.
    • Replace the three T30 Torx screws.
    • Replace the two covers.
    • Replace the pin in the side of the door panel.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2011Chevy HHR Chevy HHR Power Smooth Black - Paint to Match Mirror Driver Side

This part replaces:

  • Partslink GM1320366
  • OE # 25849365
  • TYC 1540132
  • DEPO 335-5427L3EP
Only 4 left in stock
Part #: 1AMRE02089


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:44 min)