Replaces

Strut & Spring Assembly Pair Monroe Quick-Strut 171670 - MNSSP00076

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:45)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:02)
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and a 21 mm socket and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (1:40)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (2:10)
    • Work the strut into place and bolt in the top three 13 mm bolts
    • Torque the three 13 mm nuts to 35-45 ft lbs
    • Bolt in the bottom two nuts and bolts and torque to 100 ft lbs.
  5. step : Replace the wheel (3:46)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Chevy Impala Front Strut & Spring Assembly for Police & Taxi Models Pair Monroe Quick-Strut 171670
  • 1998-2002 Olds Intrigue Front Strut & Spring Assembly Pair Monroe Quick-Strut 171670

This part replaces:

  • Monroe Quick-Strut 171670
Part #: MNSSP00076

Out of Stock

Monroe Quick-Strut
Brand #: 171670

How-to Video:

(04:55 min)