Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Front or Rear Location:   Rear
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

This rear brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece REAR Brake Pad Set
  • Direct replacement
  • Professional Grade SEMI-METALLIC Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the rear brake calipers (1:46)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 14mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 18mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Screw in the two 10M bolts to remove the rotor.
    • Take care not to damage the lug studs.
  3. step : Install new rear brake rotor and pads (6:30)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 90-100 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 15-20 ft lbs.
  4. step : Put the rear wheel back on (10:25)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • M10 x 7cm bolts
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2017Buick Enclave Buick Enclave Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2004-2007Buick Rainier Buick Rainier Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2004-2006Chevy SSR Chevy SSR Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2009Chevy Trailblazer Chevy Trailblazer Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2009-2017Chevy Traverse Chevy Traverse Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2016GMC Acadia GMC Acadia Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2009GMC Envoy GMC Envoy Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2006GMC Envoy XL GMC Envoy XL Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2004-2005GMC Envoy XUV GMC Envoy XUV Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2003-2008Isuzu Ascender Isuzu Ascender Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2004Oldsmobile Bravada Olds Bravada Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2005-2009Saab 9-7X Saab 9-7X Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2010Saturn Outlook Saturn Outlook Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00020


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD883

How-to Video:

(11:30 min)