Specifications:

  • Premium Posi Semi Metallic Disc Brake Pads
  • 4 Piece front brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:13)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 10 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and pry off the caliper.
    • Remove the rotor.
  3. step : Install the new disc brakes (4:01)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 10 mm socket.
    • Torque the 10 mm bolts to 25 ft lbs.
  4. step : Mount the wheel (7:44)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:52 min)

Tools List:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket



This part replaces:

  • Nakamoto MD730
  • Reference Number MD730B

Vehicle Fit

  • 1999-2004 Chrysler 300M Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2004 Chrysler Concorde Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1999-2001 Chrysler LHS Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2001-2002 Chrysler Prowler Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2004 Dodge Intrepid Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2002 Dodge Neon Front Premium Posi Semi-Metallic Brake Pads for Models with Rear Disc Brakes excluding RT Nakamoto
  • 2003-2005 Dodge Neon Front Premium Posi Semi-Metallic Brake Pads excluding RT excluding SRT-4 Nakamoto
  • 2000-2001 Plymouth Neon Front Premium Posi Semi-Metallic Brake Pads for Models with Rear Disc Brakes Nakamoto
  • 1997 Plymouth Prowler Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1999-2001 Plymouth Prowler Front Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00064

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD730

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More