Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant

Specifications:

  • Premium posi Semi Metallic brake pads
  • 4 Piece front brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:15)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicators
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:02)
    • Remove the two 14mm bolts from the brake caliper
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull the brake pads off
  4. step : Removing the Brake Rotor (2:40)
    • Check that the caliper slides move freely
    • If the slides do not move freely, apply penetrating oil
    • Twist the slide out with water pump pliers and a hammer
    • Twist the slide out with a pair of vise-grip pliers
    • Remove the two 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (4:29)
    • Slide the rotor on
    • Thread one lug nut by hand to hold the rotor in place
    • Put the bracket back into place
    • Start the two 19mm bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
    • Clean the caliper slides with a wire brush
    • Apply penetrating oil to the slides
    • Apply bearing grease to the slides
    • Insert the caliper slides
  6. step : Installing the New Brake Pads (5:41)
    • Use a large C-clamp to push the pistons back into the caliper
    • Install the new brake pads into the bracket with the wear indicator tab on the upper side
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten the two 14mm bolts to 20 foot-pounds
    • Pull the wheel straight
    • Remove the place holder lug nut
  7. step : Reattaching the Wheel (7:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 - 110 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (8:16)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket
  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2001Infiniti G20 Infiniti G20 Semi-Metallic Premium Posi Brake Pads Front Nakamoto
1996-1999Infiniti I30 Infiniti I30 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
1993-2001Nissan Altima Nissan Altima Front Premium Posi Semi-Metallic Brake Pads Nakamoto
1989-1999Nissan Maxima Nissan Maxima Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2000-2001Nissan Sentra Nissan Sentra L4 2.0L Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2002-2006Nissan Sentra Nissan Sentra SE-R (excluding Spec V) Front Premium Posi Semi-Metallic Brake Pads Nakamoto
2007-2008Suzuki SX4 Suzuki SX4 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00015


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD653

How-to Video:

(08:45 min)