Specifications:

  • 4 Piece REAR Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Remove the lug nut covers with a 7mm Allen Wrench
    • Insert the lug nut key into the locking lug nut
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel will not come off, thread one lug nut and use a pry bar to loosen the wheel
  2. step : Inspecting the Brakes (1:54)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:04)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver
    • Pry the caliper off with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads by hand
  4. step : Removing the Brake Rotor (2:39)
    • Remove the two 8mm Allen bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips head screw from the rotor
    • If the screw will not remove, drill it out
    • Pull the rotor off
  5. step : Preparing the New Brakes (3:17)
    • Put a large C-clamp on to the brake caliper
    • Apply pressure to the brake piston
    • Twist the piston in with slip joint pliers and adjust the C-clamp to maintain pressure
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Clean the brake pad slides with a wire brush
    • Check the caliper slides for smooth movement
    • If the caliper slides do not move smoothly, clean them and apply grease
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
  6. step : Installing the New Brake Rotor (4:54)
    • Slide the rotor on
    • Insert the Phillips screw into the brake rotor
    • Put the bracket back into place
    • Start the two 8mm Allen bolts by hand
    • Tighten the bolts to 50 foot-pounds of torque
  7. step : Installing the New Brake Pads (5:42)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the two 13mm bolts
  8. step : Reattaching the Wheel (6:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Remove the lug nut key
    • Put on the lug nut caps
  9. step : Testing the Brakes (6:55)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 7mm Allen Wrench
  • 8mm Allen Wrench

  • General Tools

  • Large C-Clamp
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Mineral Spirits
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997 Audi A4 2 Wheel Drive Rear Premium Posi Semi-Metallic Brake Pads (Built After VIN 168351) Nakamoto
  • 1998-2006 Audi A4 2 Wheel Drive Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2002 Audi A4 Quattro Quattro Rear Premium Posi Semi-Metallic Brake Pads for Models with 10.1" (256mm) Diameter Rotors Nakamoto
  • 2003-2005 Audi A4 Quattro Quattro Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2004 Audi A6 2 Wheel Drive Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2004 Audi A6 Quattro Quattro Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000 Audi A8 Quattro Rear Premium Posi Semi-Metallic Brake Pads (From VIN 005001) Nakamoto
  • 2001-2002 Audi A8 Quattro Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2003 Audi A8 Quattro Rear Premium Posi Semi-Metallic Brake Pads (To VIN 004999) Nakamoto
  • 2001-2005 Audi Allroad Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2001 Audi S4 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2002 Audi S4 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2006 Audi TT Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2000-2006 Audi TT Quattro Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1989-1991 Peugeot 405 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1998-2010 VW Beetle Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1999-2002 VW Cabrio Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990-1994 VW Corrado Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1985-2006 VW Golf Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1985-2004 VW Jetta Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2005 VW Jetta H4 1.8L Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2005 VW Jetta Semi-Metallic Premium Posi Brake Pads L4 2.0L Rear Nakamoto
  • 2005 VW Jetta Semi-Metallic Premium Posi Brake Pads L4 1.9L Rear Nakamoto
  • 1990-2005 VW Passat Rear Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1986-1988 VW Quantum Rear Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1986-1988 VW Scirocco Rear Brake Pads Semi-Metallic Premium Posi Nakamoto

This part replaces:

  • Reference Number MD340
  • Nakamoto MD340
Part #: 1ABPS00467

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD340

How-to Video:

(07:25 min)