Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove hub cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your screwdriver to pry out your brake pads
    • Use your 17mm socket and ratchet to remove your caliper brackets to access the rotors
    • Pull off the brake rotor
  3. step : Installing the New Rotor and Pads (3:57)
    • Clean new rotor with brake cleaner
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 80 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts to 25 ft lbs
  4. step : Reinstalling the Wheel (8:10)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 100 ft lbs
    • Replace hubcap
  5. step : Test and Set Brakes (7:46)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
    • Obviously this is best done on a straight back road without any traffic

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
are very good , there nothing problem when I shopping as 1aauto.com
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Lexus ES300 Front Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 1990-1992 Lexus LS400 Front Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1992-1998 Lexus SC300 Front Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1992-1998 Lexus SC400 Front Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1995-1997 Toyota Avalon Front Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1992-1996 Toyota Camry Front Brake Pads V6 3.0L Semi-Metallic Premium Posi Nakamoto
  • 1999-2001 Toyota Camry Front Brake Pads L4 2.2L & 15 Inch Wheels Semi-Metallic Premium Posi Nakamoto
  • 1994-1999 Toyota Celica Front Brake Pads Semi-Metallic Premium Posi Nakamoto
  • 1998-2003 Toyota Sienna Front Premium Posi Brake Pads Nakamoto

This part replaces:

  • Nakamoto MD697
Part #: 1ABPS00074

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD697

How-to Video:

(09:00 min)