Replaces

2007-11 Toyota Camry Interior Door Handle - 1ADHI00448

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black

This door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side) FRONT or REAR
  • Replaces dealer part number: 69205-06030-C0, 6920506030C0
  • Smooth Black Finish
  • Direct replacement
  • Built to strict quality control standards

This door handle is a great replacement and has good cost savings over the dealer unit.

Special Note:

  • This new handle is made to the original color shade.  Due to vehicle age and fading from the sun, our new handles may not match your existing handle or bezel exactly.  If you are looking for an exact match, we recommend replacing handles in pairs or sets.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:19)
    • Pry the courtesy light out of the door panel with a trim tool
    • Disconnect the courtesy light electrical connector
    • Pry the trim piece off the mirror base with a trim tool
    • Pry the grab handle panel off the door handle with a trim tool
    • Pry the trim piece out of the door handle with a trim tool
    • Pry the clip out of the front of the door panel with a trim tool
    • Remove the Phillips screw inside the door handle
    • Remove the two Phillips screws from the grab handle
    • Pry out the door panel clips by hand
    • Lift the door panel off the door
    • Unclip the door lock cable from the door handle
  2. step : Removing the Interior Door Handle (2:25)
    • Unclip the door lock cable from the door handle
    • Pop the door handle out of the door
    • Disconnect the wiring harness from the door panel
    • Unclip the wiring harness from the door panel
    • Disconnect the door latch cable from the door handle
    • Remove the Phillips screws from the back of the door handle trim
    • Pull the door handle trim out of the door panel
  3. step : Installing the Interior Door Handle (3:29)
    • Line up the door handle trim onto the back of the door panel
    • Insert the Phillips screws into the back of the door handle trim
    • Clip the white door cable into the top of the door handle
    • Clip the green door cable into the bottom of the door handle
  4. step : Installing the Door Panel (4:23)
    • Feed the courtesy light electrical connector through the door panel
    • Connect the electrical connector to the door panel
    • Clip the door handle into the door panel
    • Lift the door panel onto the door
    • Line up the door panel, using the locating pins
    • Push in the door panel clips
    • Insert the Phillips screw inside the door handle
    • Clip the trim into the door handle
    • Insert the two Phillips screws into the grab handle
    • Clip the trim onto the grab handle
    • Clip the trim piece onto the mirror base
    • Push the plastic clip into the front of the door panel
    • Connect the courtesy light electrical connector
    • Push the courtesy light into the door panel

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2007-2011Toyota Camry Toyota Camry Front or Rear Black Interior Door Handle Passenger Side
Only 1 left in stock
Part #: 1ADHI00448


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:42 min)