Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Specifications:

  • Comes as a Pair
  • Includes LH (Driver Side) & RH (Passenger Side) REAR
  • Cast Iron Construction
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:00)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the wheel lock lug nut with a wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:50)
    • Pull off the drum
    • Tap around the edges and in between the studs if necessary
    • Remove the wheel on the opposite side
  3. step : Removing the Brake Shoes (2:32)
    • Remove the upper brake shoe springs with the vise grip pliers
    • Remove the e-brake cable eyelit
    • Remove the upper plate from the pin
    • Remove the springs and rocker plate the rest of the way
    • Remove the left brake shoe spring with the vise grip pliers
    • Twist off the pin with the vise grip pliers
    • Remove the left brake shoe
    • Twist off the rear retaining spring with the vise grip pliers
    • Twist off the pin with the vise grip pliers
    • Pry the emergency brake cable out of the brake shoe
  4. step : Removing the E-brake Actuator (5:04)
    • Remove the adjustor
    • Remove the spring
    • Pry off the horseshoe clip with pliers
  5. step : Installing the E-brake Actuator (7:30)
    • Insert the spring washer onto the brake shoe
    • Insert the horseshoe clip to the e-brake
    • Crimp the ends of the horseshoe clip
    • Install the spring and adjustor to the shoe
  6. step : Installing the New Brake Shoes (8:37)
    • Clean the backing plate friction points with a wire brush
    • Apply white grease to the friction points
    • Lift the left brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Install the spreader bar with the spring facing the right brake shoe
    • Put the right brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Insert the plate into place
    • Insert the pivot to the brake shoe hole and hook the longer spring to it
    • Connect the eyelit
    • Hook the longer springs on with the vise grip pliers
  7. step : Installing the New Brake Drum (12:40)
    • Try to slide the brake drum on
    • If necessary turn the adjuster wheel with a flat blade screwdriver
    • The brake rotor should slide on with some resistance
  8. step : Reattaching the Wheel (13:44)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998-2000Ford Ranger Ford Ranger Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
2003-2009Ford Ranger Ford Ranger Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
2001-2009Mazda B2300 Truck Mazda B2300 Truck Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
1998-2001Mazda B2500 Truck Mazda B2500 Truck Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
1998-2007Mazda B3000 Truck Mazda B3000 Truck Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
1998-2009Mazda B4000 Truck Mazda B4000 Truck Rear Wheel Cylinder Pair for Models with with 10 Inch Drums
Part #: 1ABCK00037


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:42 min)