Replaces

Wheel Bearing & Hub Assembly Front Timken 513017k - TKSHF00008

TIMKEN HUB ASSEMBLY: 513017K

Specifications:

  • Brand New Timken Hub Assembly
  • Direct replacement
  • Replaces OE# 7470014
  • Fits RH or LH FRONT
  • Built to strict quality control standards


Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Part Details

  • Front or Rear Location: Front

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
where does the metal ring w/ gasket go? front of bearing or rear? and where does the other gasket go?
john l on Oct 24, 2015
BEST ANSWER: Hello, Depending on the model application, you may need to use these items. These go on the backside of the hub area.

Vehicle Fit

  • 1984-1989 Buick Skyhawk Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1988-1997 Buick Skylark Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1985-1987 Buick Somerset Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1984-1988 Cadillac Cimarron Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1987-1996 Chevy Beretta Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1984-2004 Chevy Cavalier Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1987-1996 Chevy Corsica Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1992-1998 Olds Achieva Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1985-1991 Olds Cutlass Calais Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1984-1987 Olds Firenza Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1984 Pontiac 2000 Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1985-1998 Pontiac Grand Am Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1984-1994 Pontiac Sunbird Front Wheel Bearing & Hub Assembly Timken 513017k
  • 1995-2005 Pontiac Sunfire Front Wheel Bearing & Hub Assembly Timken 513017k

This part replaces:

  • Timken 513017k
Only 4 left in stock
Part #: TKSHF00008


Order must be placed by 4pm ET
Timken
Brand #: 513017k

How-to Video:

(09:45 min)