Replaces

Volkswagen Golf Jetta Window Regulator - 1AWRG02574

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

Specifications:

  • LH (Driver Side) Front
  • Does NOT include the power window motor
  • Power operation
  • Direct replacement
  • Built to strict quality control standards

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

We are committed to offering the absolute best value for our customers. If you want a highest quality window regulator at a great price, please see our other "High Quality" window regulator listings. If price is your main concern, we are offering this economy style window regulator as well. It is the same one that most internet sellers are offering. While this window regulator is a good replacement, it is not backed by the same warranty as our high quality regulator.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:43)
    • Pry off the door pull panel with a flat blade screwdriver
    • Pull the window switch panel up and out
    • Disconnect the window switch wiring harness
    • Remove the three Phillips head screws from behind the door pull
    • Remove the three T20 Torx bolts
    • Remove the Phillips screw from the front top corner of the door panel
    • Pry the door panel off by hand
    • Pull the door panel up and off the window sill
    • Pull the door handle cable out of the door cable
    • Disconnect the door lock wiring harness
    • Disconnect the courtesy light wiring harness
    • Disconnect the remaining wiring harnesses
  2. step : Removing the Window Regulator Panel (2:39)
    • Disconnect the mirror wiring harness
    • Disconnect the speaker wiring harness
    • Disconnect the window motor wiring harness with a flat blade screwdriver
    • Pull the wiring from the tabs in the regulator panel
    • Pull out the wiring gasket
    • Flip down the rubber window covers
    • Remove the three T30 bolts from the window motor
    • Remove the window motor
    • Raise the window by hand
    • Remove the two T20 bolts from the window clamps
    • Separate the window from the window clamps
    • Remove the 10mm bolts from the regulator panel
    • Push the clip back through the regulator panel
    • Slide the regulator panel back and down
    • Push the door handle cable through the panel
    • Push the tab out of the door
    • Angle the regulator panel down and lift the panel off of the lock rod, pushing the gasket through
    • Disconnect the lock rod wiring harness
  3. step : Assembling the New Regulator Panel (5:38)
    • Remove the rubber caps from the regulator panel
    • Remove the wiring harness clips with needle nose pliers
    • Remove the speaker cover
    • Drill out the four rivets that hold the speaker
    • Pry off the speaker with a flat blade screwdriver
    • Insert the speaker into the new regulator panel
    • Insert the rivets into the speaker with a rivet gun
    • If you don’t have a rivet gun, use coarse-threaded bolts
    • Put the speaker cover onto the speaker
    • Insert the wiring harness clips into the new regulator panel
    • Push the rubber caps into the new window regulator
  4. step : Installing the New Window Regulator (7:36)
    • Pull the lock rod wiring harness through the regulator panel
    • Push the wiring gasket into place
    • Reconnect the lock rod wiring harness
    • Push the door handle cable and gasket through the panel
    • Put the lock rod and gasket through the panel
    • Push the panel into place, being sure not to pinch the wiring harnesses
    • Insert the 10mm bolts into the regulator panel
    • Loosen the 10mm bolts on the window clamps
    • Slide the window into its clamps
    • Tighten the 10mm clamp bolts
    • Put the rubber caps on
    • Push the window motor into place
    • Insert the three T30 bolts into the motor
    • Reconnect all the wiring harnesses to the regulator panel
    • Push the window motor harness tab up to lock the harness in place
    • Push the wiring onto the wiring clips
    • Hold the wiring to the clips with electrical tape if necessary
  5. step : Reinstalling the Door Panel (10:41)
    • Reconnect the wiring harnesses to the door panel
    • Attach the door handle cable to the door handle
    • Slide on the door handle cable clip
    • Slide the panel into place
    • Pull the window switch wiring harness through the door pull cavity
    • Push the door panel clips in
    • Insert the three Phillips head screws into the door pull
    • Insert the three T20 screws into the bottom of the door panel
    • Insert the Phillips head screw into the door panel
    • Reconnect the window switch wiring harness
    • Push the window switch panel into place
    • Push the door pull panel into place

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 5/16 Inch Drill Bit

  • Materials, Fluids, and Supplies

  • Electrical Tape
  • Coarse Threaded Bolts (to replace rivets)

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Rivet Gun & Rivets

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999Volkswagen Golf VW Golf (Built After 10/98 Production Date) Front Power Window Regulator without Motor Driver Side
2000-2006Volkswagen Golf VW Golf Front Power Window Regulator without Motor Driver Side
1999Volkswagen Jetta VW Jetta (Built After 10/98 Production Date) Front Power Window Regulator without Motor Driver Side
2000-2004Volkswagen Jetta VW Jetta Front Power Window Regulator without Motor Driver Side
2005Volkswagen Jetta VW Jetta (Built Before 12/04 Production Date) Front Power Window Regulator without Motor Driver Side
Part #: 1AWRG02574


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:31 min)