Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Throttle Body & Actuator Assembly
  • 100% electrically tested prior to leaving the factory
  • Direct replacement
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Accelerator Pedal Release Position Learning (0:15)
    • Do not depress the accelerator pedal
    • Turn the key to the ON position for atleast 2 seconds
    • Turn the key to the OFF position for 10 seconds
    • Turn the key to the ON position for 2 seconds
    • Turn the key to the OFF position for 10 seconds
  2. step : Throttle Valve Close Position Learning (1:00)
    • Do not depress the accelerator pedal
    • Turn the key to the ON position for 10 seconds
    • Turn the key to the OFF position and listen for the throttle body making a whining sound
  3. step : Idle Air Volume Learning (1:41)
    • Run the vehicle up the operating temperature with the vehicle in park, the steering wheel straightened, and the headlights and A/C and other electrical loads off
    • At idle, make sure the vehicle has more than 12.9 volts at the battery
    • Let the vehicle reach up to temp
    • Turn the vehicle off
    • Let the ignition be off for 10 seconds
    • Do not depress the accelerator pedal
    • Turn the key to the ON position and wait 3 seconds
    • Press the accelerator pedal five times in 5 seconds
    • Wait for 7 seconds
    • Check engine light should flash
    • Hold the accelerator pedal down for 20 seconds
    • Release the accelerator pedal within 3 seconds when the engine light stops blinking
    • Start the engine and let it idle
    • Rev the engine a couple of times
    • Confirm the engine returns to the correct idle (around 700 RPM in park for automatic transmission)
    • Confirm there is no check engine light

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2008Infiniti FX35 Infiniti FX35 Throttle Body Assembly
2003-2006Infiniti G35 Infiniti G35 Throttle Body Assembly
2007Infiniti G35 Infiniti G35 Coupe Throttle Body Assembly
2002-2004Infiniti I35 Infiniti I35 Throttle Body Assembly
2006-2008Infiniti M35 Infiniti M35 Throttle Body Assembly
2003-2006Nissan 350Z Nissan 350Z Throttle Body Assembly
2002-2006Nissan Altima Nissan Altima Throttle Body Assembly V6 3.5L
2002-2008Nissan Maxima Nissan Maxima Throttle Body Assembly
2003-2007Nissan Murano Nissan Murano Throttle Body Assembly
2004-2009Nissan Quest Nissan Quest Throttle Body Assembly
Part #: 1ATBA00027


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:48 min)