Replaces

Serpentine Belt Tensioner with Pulley - 1AEBT00099

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Brand New Belt Tensioner Assembly
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Mount (0:23)
    • Remove the plastic pins from the splash shield with a trim tool
    • Lower the wheel well
    • Support underneath the engine oil pan with a block of wood and a floor jack
    • Remove the three 17mm mounting bolts from the engine mount
    • With the engine supported, remove the engine mount
  2. step : Removing the Serpentine Belt (3:28)
    • Familiarize yourself with the route of the serpentine belt
    • Insert a serpentine belt tensioner tool into the tensioner
    • Turn the tensioner clockwise to loosen the belt
    • Pull the belt off the alternator
    • Release the tensioner
    • Pull the belt off by hand
  3. step : Removing the Power Steering Pump (4:17)
    • Remove the four 17mm mounting bolts from the power steering pump
    • Set the power steering pump aside
  4. step : Removing the Serpentine Belt Tensioner (4:17)
    • Remove the three 12mm mounting bolts from the belt tensioner
    • Remove the belt tensioner
  5. step : Installing the Serpentine Belt Tensioner (8:10)
    • Insert the serpentine belt tensioner into place
    • Tighten the three 12mm mounting bolts to the belt tensioner
    • Torque the 12mm mounting bolts to 16 foot-pounds
  6. step : Installing the Power Steering Pump (9:26)
    • Insert the power steering pump into place
    • Tighten the four 17mm mounting bolts to the power steering pump
    • Torque the 17mm mounting bolts to 16 foot-pounds
  7. step : Installing the Serpentine Belt (10:23)
    • Bring it around the A/C Pulley
    • Loop the belt around the crank pulley
    • Bring it around the water pump pulley
    • Bring it around the alternator
    • Bring it around the power steering pulley
    • Bring it around the belt tensioner
    • Pull the tensioner clockwise with the 3/8 inch ratchet
    • Secure the belt over the power steering pulley
    • Release the tensioner
  8. step : Installing the Engine Mount (12:42)
    • Insert the engine mount into place
    • Slowly lower the floor jack
    • Tighten the four 17mm mounting bolts
    • Press the clips into the splash shield

Tools needed for replacement:

    General Tools

  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • 14mm Wrench
  • 15mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Look no further - Excellent belt tensioner pulley
My 2008 Honda CRV (130K miles) started making a rattling noise, most noticeable during idle, it was a faulty belt tensioner. I replaced it with this part from 1A Auto and it fixed the problem. It seems of very high quality and with a lifetime warranty, you cant go wrong. I would like to add that the Staff at 1A Auto are great and I like the videos they provide for the do it yourself folks like me.
December 30, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2013-2015Acura ILX Acura ILX Serpentine Belt Tensioner with Pulley L4 2.4L
2007-2012Acura RDX Acura RDX Serpentine Belt Tensioner with Pulley
2004-2006Acura TSX Acura TSX Serpentine Belt Tensioner with Pulley
2003-2007Honda Accord Honda Accord Serpentine Belt Tensioner with Pulley L4 2.4L
2002-2014Honda CR-V Honda CR-V Serpentine Belt Tensioner with Pulley
2006-2011Honda Civic Honda Civic Serpentine Belt Tensioner with Pulley L4 2.0L
2012-2015Honda Civic Honda Civic Serpentine Belt Tensioner with Pulley L4 2.4L
2003-2011Honda Element Honda Element Serpentine Belt Tensioner with Pulley
Part #: 1AEBT00099


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:42 min)