Rocker Bottom & Cab Corner Repair Panel Kit Rear - 1ARPS00017

Warranty & Shipping
Product Reviews
Vehicle Fit

Part Details

  • Front or Rear Location:   Rear

These extended cab rust repair panels are just what you need to get your vehicle in good looking form again!

Cab Corner Repair Panel Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR CORNER
  • One-piece Stamped Steel Construction
  • Fits 3 DOOR Extended Cab Models only
    • Does NOT fit 2 Door or 4 Door Extended Cab Models

Rocker Repair Panel Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Made from Galvanized Steel
  • 73 Inches in Length
  • Die Stamped for exact fit
  • Bowed exactly like the original rocker panels
  • Bumps or bullets are in the exact same place as the original rocker panels
  • Fit Extended Cab Models only
NOTE: Fit Classic Body Style Models only. New Body Style has a smooth door skin. Classic Body Style has a crease down the center of the door shell.

Now you can buy for yourself what has only been made available to bodyshops for years. Replace those rusted out, dented, or damaged panels now and bring that luster back to your truck!

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -


Please inspect this part carefully prior to installation and contact us with any questions BEFORE attempting to install it. Due to the nature of this part, our 60-day warranty covers exchanges only. Parts that have been installed, neglected, or modified in any way are not eligible for this exchange.

5.00/ 5.0
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Top quality
Relocated from Midwest bad winter conditions salt causeing rusting replaced rocker panels these are top quality fit like originals perfectly highly recommend
November 22, 2016
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does this come with inner rocker panels?
Roy S July 15, 2016
Brian F July 18, 2016
nope my set didnt
Edward L July 18, 2016
No. All outer panels.
Christopher D July 18, 2016
No, not the vertical panel under the truck. I took scrap metal and welded some pieces of that in for support. I was happy with these panels in my project.
Mark W July 18, 2016
John E July 18, 2016
No they do not, however are easily fabricated from sheet metal.
Mark N July 19, 2016
No it does not. Outer panels only, but good quality.
Lance P July 19, 2016
No only outter panel came in the kit . Nice fit on my 1999 GMC Sierra 1500
Michael R July 19, 2016
No, this is the outer rockers and cab corners only.
Jeffrey G July 19, 2016
No it does not .
Kevin S July 20, 2016
no sir,it does not. however its an overall good product. my truck passed pa.inspegtion twice since I installed them. hope this helps.
Jim F July 21, 2016
are these slip over where you can put them over the top? without welding?
Rollie C November 22, 2016
Its possible it could work but to get the best results remove rusted areas the weld panels in place.
James F November 22, 2016
you can slip over and make look decent but they are intended to be welded in once the old rusty parts are cut off.
Brian F November 22, 2016
the rockers can slip over and screw down the top and underside,the corner shoud be cut out to fit better
Kevin H November 22, 2016
No, these need to be welded
Jeffrey G November 22, 2016
use stainless steel self drilling screws
Kevin H November 23, 2016
nope had to cut out most of the original
Edward L November 23, 2016
How long are the rocker panels? Are they long enough for the entire cab or do i have to buy another piece because the description says its a rear rocker replacement
Jacob K February 4, 2018
It starts at the back of the rear door and goes to the front wheel opening as I remember. I replaced cab corners also. Good fit.
Dave O February 4, 2018
Both rocker panels were long enough for my 1999 silverado 3 door. The section that goes on driver side behind driver door goes all the way around bottom. So the lower rocker on driver side needed to be cut shorter.
Steven L February 4, 2018
These panels fit perfect you do not need to buy anything els unless you want to get inner rockers
Tye C February 5, 2018
Year Make Model Description
1999-2006Chevy Silverado 1500 Chevy Silverado 1500 3 Door Extended Cab Rear Rocker Bottom & Cab Corner Repair Panel Kit
2000-2004Chevy Silverado 2500 Chevy Silverado 2500 3 Door Extended Cab Rear Rocker Bottom & Cab Corner Repair Panel Kit
1999-2006GMC Sierra 1500 GMC Sierra 1500 3 Door Extended Cab Rear Rocker Bottom & Cab Corner Repair Panel Kit
2000-2004GMC Sierra 2500 GMC Sierra 2500 3 Door Extended Cab Rear Rocker Bottom & Cab Corner Repair Panel Kit
Part #: 1ARPS00017

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout