Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • Left Hand (Driver Side)
  • Includes lens, housing, and mounting panel
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Grille (0:49)
    • Clasp behind the grille with needle nose pliers
    • Press the clips on the grille with a flat blade screwdriver
    • Remove the grille
  2. step : Removing the Headlight (2:10)
    • Remove the 10mm bolt from the side marker light
    • Pry the side marker light out with a trim tool
    • Disconnect the wiring harness
    • Remove the 10mm bolt from the lower headlight bracket
    • Remove the two 10mm nuts from the side of the headlight
    • Remove the 10mm nut from beneath the headlight
    • Remove the 10mm nut from the side headlight bracket
    • Pull the headlight in toward the center and remove it
    • Pull the socket boot off the headlight
  3. step : Installing the Headlight (5:28)
    • Release the retainer from the old headlight with needle nose pliers
    • Transfer the retainers over to the new headlight
    • Connect the headlight socket boot
    • Connect the electrical connector to the headlight
    • Line the headlight with the holes on the vehicle
    • Tighten the 10mm bolt beneath the headlight
    • Tighten the three 10mm bolt to the sides of the headlight
    • Tighten the 10mm bolt to the lower headlight bracket
    • Connect the wiring harness to the side marker wiring harness
    • Press the side marker light into place
    • Tighten the 10mm bolt to the side marker light
  4. step : Installing the Grille (8:24)
    • Snap the grille into place
  5. step : Adjusting the Headlights (8:48)
    • Mark on a wall the center axis point of the headlight
    • Back up 25 feet from the wall
    • Turn the headlights on
    • Turn the adjustor with a Phillips screwdriver
    • Have the passenger side 2 inches below the mark
    • Have the driver side 4 inches below the mark

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant
  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999Nissan Pathfinder Nissan Pathfinder (Built After 11/98 Production Date) Headlight Driver Side
2000-2004Nissan Pathfinder Nissan Pathfinder Headlight Driver Side
Part #: 1ALHL00892


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:49 min)