Replaces

Ignition Lock Cylinder Case with Passlock Sensor Dorman 924-714 - 1AIMX00168

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This ignition housing or Passlock ignition sensor is a new aftermarket part. It is the piece that your ignition lock cylinder fits into inside your dash or steering column.

Specifications:

  • Ignition Lock Cylinder Case with Passlock Sensor
  • Replaces dealer part numbers: 88964342
  • Direct replacement
  • Built to strict quality control standards

This part makes a great replacement and has good cost savings over a dealer part.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Cadmium and Cadmium Compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:57)
    • Disconnect your negative battery cable, which is located on the passenger side at the top of the shock tower
    • Use your 15mm wrench
  2. step : Removing Ignition Cylinder (1:07)
    • Use your torx drivers, remove the T30 screw
    • Remove the two T15 screws underneath
    • Pull up on the steering column cover to pop it off
    • Unclip the ignition cylinder bezel
    • Turn the key to the 'run' position and press the little button on the side and pull the cylinder out
  3. step : Install the New Ignition Cylinder (3:25)
    • Stick the new ignition cylinder in and click the button in
    • Click the cylinder bezel back in, making sure the little mark indicating the top position is pointing up
    • Put the steering column cover back on, starting with the bottom piece, and click the top one over
    • Screw in your two T15 screws and your T30 screw
  4. step : Reconnecting the battery (5:30)
    • Use your 15mm wrench

Tools needed for replacement:

    Torx Drivers & Sockets

  • T15 Torx Driver
  • T30 Torx Driver

  • Wrenches - Metric

  • 15mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what is the procedure to replace?
Steve C May 10, 2018
Depends on the vehicle .2012 GMC Sierra was a breeze. Pushed in plastic on each side of cylinder and exposed cylinder. Push down on hole on top with awl and back key and cylinder out.
Lewis C August 1, 2018
Year Make Model Description
2003-2007Chevy Express 1500 Van Chevy Express 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V6 4.3L (8th Vin Digit X) Dorman 924-714
2003-2007Chevy Express 1500 Van Chevy Express 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit T) Dorman 924-714
2007Chevy Express 1500 Van Chevy Express 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit Z) Dorman 924-714
2003-2005Chevy Express 2500 Van Chevy Express 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V6 4.3L (8th Vin Digit X) Dorman 924-714
2003-2005Chevy Express 2500 Van Chevy Express 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit T) Dorman 924-714
2003-2007Chevy Express 2500 Van Chevy Express 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 4.8L (8th Vin Digit V) Dorman 924-714
2003-2007Chevy Express 2500 Van Chevy Express 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.0L (8th Vin Digit U) Dorman 924-714
2006-2007Chevy Express 2500 Van Chevy Express 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.6L Turbo Diesel (8th Vin Digit 2) Dorman 924-714
2003-2007Chevy Express 3500 Van Chevy Express 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.0L (8th Vin Digit U) Dorman 924-714
2005-2007Chevy Express 3500 Van Chevy Express 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 4.8L (8th Vin Digit V) Dorman 924-714
2006-2007Chevy Express 3500 Van Chevy Express 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.6L Turbo Diesel (8th Vin Digit 2) Dorman 924-714
2003-2007GMC Savana 1500 Van GMC Savana 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V6 4.3L (8th Vin Digit X) Dorman 924-714
2003-2007GMC Savana 1500 Van GMC Savana 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit T) Dorman 924-714
2007GMC Savana 1500 Van GMC Savana 1500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit Z) Dorman 924-714
2003-2005GMC Savana 2500 Van GMC Savana 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V6 4.3L (8th Vin Digit X) Dorman 924-714
2003-2007GMC Savana 2500 Van GMC Savana 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 4.8L (8th Vin Digit V) Dorman 924-714
2003-2005GMC Savana 2500 Van GMC Savana 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 5.3L (8th Vin Digit T) Dorman 924-714
2003-2007GMC Savana 2500 Van GMC Savana 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.0L (8th Vin Digit U) Dorman 924-714
2006-2007GMC Savana 2500 Van GMC Savana 2500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.6L Turbo Diesel (8th Vin Digit 2) Dorman 924-714
2003-2007GMC Savana 3500 Van GMC Savana 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.0L (8th Vin Digit U) Dorman 924-714
2004-2007GMC Savana 3500 Van GMC Savana 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 4.8L (8th Vin Digit V) Dorman 924-714
2006-2007GMC Savana 3500 Van GMC Savana 3500 Van Ignition Lock Cylinder Case with Passlock Sensor V8 6.6L Turbo Diesel (8th Vin Digit 2) Dorman 924-714
Part #: 1AIMX00168

Out of Stock

Dorman
Brand #: 924-714

How-to Video:

(05:57 min)