Replaces

Honda Acura Suzuki Isuzu Caliper Hardware Kit - 1ABRX00105

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

 

Highest Quality Materials

Made from highest quality materials that meet or exceed OEM standards

Direct Fit Replacement

Direct fit replacement part guaranteed to fit and function properly for your specific application

Quality Tested

Quality tested and built to a strict level of product standards

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:27)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:49)
    • Remove the 12mm bolt from the brake line bracket
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
    • Clean the slides with a wire brush
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
  3. step : Removing the Brake Rotor (3:06)
    • Remove 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (6:09)
    • Turn the caliper piston in with needle nose pliers
    • Clean the brake pad slides with a wire brush and brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the rotor with brake parts cleaner
  5. step : Installing the New Brake Rotor (9:24)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the caliper bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 54 foot-pounds of torque
  6. step : Installing the New Brake Pads (10:33)
    • Place brake grease on the brake pad tab
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Counterhold the caliper slide with a 17mm wrench and tighten with a 12mm socket and ratchet
    • Tighten bolts to 17 foot-pounds
    • Tighten the brake line bracket with a 12mm bolt
  7. step : Reattaching the Wheel (12:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 79.6 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (13:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Pick
  • Rubber Mallet
  • Floor Jack
  • Center Punch
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 12mm Wrench
  • 17mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2013-2017Acura ILX Acura ILX Rear Caliper Hardware Kit
1997-1998Acura Integra Acura Integra Type R Rear Caliper Hardware Kit
2000-2001Acura Integra Acura Integra Type R Rear Caliper Hardware Kit
1987-1988Acura Legend Acura Legend Coupe Rear Caliper Hardware Kit
1989-1995Acura Legend Acura Legend Rear Caliper Hardware Kit
2007-2018Acura RDX Acura RDX Rear Caliper Hardware Kit
1996-1998Acura RL Acura RL Rear Caliper Hardware Kit
2002-2006Acura RSX Acura RSX Rear Caliper Hardware Kit
1995-1998Acura TL Acura TL Rear Caliper Hardware Kit
2004-2008Acura TSX Acura TSX Rear Caliper Hardware Kit
1992-1994Acura Vigor Acura Vigor Rear Caliper Hardware Kit
1990-1991Honda Accord Honda Accord Sedan Rear Caliper Hardware Kit
1991Honda Accord Honda Accord Wagon Rear Caliper Hardware Kit
1992-1997Honda Accord Honda Accord Rear Caliper Hardware Kit
1998Honda Accord Honda Accord L4 2.3L Rear Caliper Hardware Kit
1999Honda Accord Honda Accord Sedan V6 3.0L Rear Caliper Hardware Kit
1999Honda Accord Honda Accord Coupe L4 2.3L Rear Caliper Hardware Kit
2000-2002Honda Accord Honda Accord Coupe Rear Caliper Hardware Kit
2003-2006Honda Accord Honda Accord V6 3.0L Rear Caliper Hardware Kit
2003-2006Honda Accord Honda Accord EX L4 2.4L Rear Caliper Hardware Kit
2007Honda Accord Honda Accord Hybrid Rear Caliper Hardware Kit
2007Honda Accord Honda Accord EX Rear Caliper Hardware Kit
2007Honda Accord Honda Accord Special Edition L4 2.4L Rear Caliper Hardware Kit
2007Honda Accord Honda Accord LX V6 3.0L Rear Caliper Hardware Kit
2010-2011Honda Accord Crosstour Honda Accord Crosstour Caliper Hardware Kit
2002-2016Honda CR-V Honda CR-V Rear Caliper Hardware Kit
2011-2015Honda CR-Z Honda CR-Z Rear Caliper Hardware Kit
2002-2005Honda Civic Honda Civic SI L4 2.0L Rear Caliper Hardware Kit
2006-2011Honda Civic Honda Civic EX Rear Caliper Hardware Kit
2006-2011Honda Civic Honda Civic SI Rear Caliper Hardware Kit
2008Honda Civic Honda Civic MUGEN Si Rear Caliper Hardware Kit
2009-2011Honda Civic Honda Civic Hybrid Rear Caliper Hardware Kit
2009-2011Honda Civic Honda Civic Hybrid-L Rear Caliper Hardware Kit
2011Honda Civic Honda Civic EX-L Rear Caliper Hardware Kit
2013-2015Honda Civic Honda Civic EX-L Rear Caliper Hardware Kit
2013-2015Honda Civic Honda Civic SI Rear Caliper Hardware Kit
2013-2015Honda Civic Honda Civic EX Rear Caliper Hardware Kit
2012-2015Honda Crosstour Honda Crosstour Rear Caliper Hardware Kit
2003-2011Honda Element Honda Element Rear Caliper Hardware Kit
1995-1998Honda Odyssey Honda Odyssey Rear Caliper Hardware Kit
1992-2001Honda Prelude Honda Prelude Rear Caliper Hardware Kit
1996-1999Isuzu Oasis Isuzu Oasis Rear Caliper Hardware Kit
2007-2013Suzuki SX4 Suzuki SX4 Rear Caliper Hardware Kit
Only 10 left in stock
Part 1ABRX00105
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.