This replacement exterior door handle is just what you need to get your vehicle's door in good working form again!

Specifications:

  • Fits RH (Passenger Side) FRONT DOOR
  • All Chrome Finish
  • Replaces dealer part numbers: 1L2Z-7822404-AACCH, 1L2Z-7822404-CAGCH, 1L2Z7822404AACCH, 1L2Z7822404CAGCH
  • Durable construction
  • Direct replacement
  • Built to strict quality control standards
  • Handle does NOT have Key Hole for Lock Cylinder

This exterior door handle is a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:36)
    • Turn off the courtesy lights
    • Pry off the door handle bezel
    • Pry up the window switch panel
    • Disconnect the window switch wiring harnesses
    • Disconnect the door lock wiring harness
    • Remove the 7mm bolt in the door pull
    • Remove the two 7mm bolts on the bottom of the door panel
    • Pry out the mirror switch
    • Disconnect the mirror switch wiring harness
    • Pry out the door panel
    • Lift the door panel up and off
    • Disconnect the wiring harness
  2. step : Removing the Outside Door Handle (2:07)
    • Carefully peel back the water shield
    • Open the latch rod clip with a pick
    • Remove the two 11mm nuts from the door handle
    • Pull the door handle out from the outside
    • If the studs remained, hold them with vise grip pliers are loosen the nuts with a socket and ratchet
    • Clean the door handle mounting area
    • If the door closes with the door handle out, pull the latch manually
  3. step : Installing the Door Handle (4:08)
    • Paint the handle to the desired color
    • Pull the latch rod off the old handle
    • Twist the latch rod into the new handle
    • Push the handle into place, starting at the front
    • Take the lock cylinder off the lock rod
    • Push the lock cylinder into the door handle
    • Fasten the two 11mm nuts onto the door handle
    • Clip the lock rod to the lock cylinder
    • Clip in the latch rod
  4. step : Reinstalling the Door Panel (7:03)
    • Connect the harness to the door panel
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the two 7mm bolts on the bottom of the door panel
    • Insert the 7mm bolt in the door pull
    • Connect the mirror switch wiring harness
    • Push in the mirror switch
    • Connect the window switch wiring harnesses
    • Connect the door lock wiring harness
    • Push in the window switch panel
    • Push in the door handle bezel

Tools needed for replacement:

    General Tools

  • Pick
  • Razor Blade / Gasket Scraper

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 11mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2010 Ford Explorer Front All Chrome Exterior Door Handle without Lock Provision Passenger Side
  • 2007-2010 Ford Explorer Sport Trac Front All Chrome Exterior Door Handle without Lock Provision Passenger Side
  • 2003-2004 Lincoln Aviator Front All Chrome Exterior Door Handle without Lock Provision Passenger Side
  • 2002-2010 Mercury Mountaineer Front All Chrome Exterior Door Handle without Lock Provision Passenger Side

This part replaces:

  • OE # 1L2Z 7822404AACCH
  • Partslink FO1311138
  • Dorman 91106
Only 2 left in stock
Part #: 1ADHE00853

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:44 min)