• Brand New EGR Valve
  • Direct Fit
  • Built to strict quality control standards

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wiper Arm (0:49)
    • Mark the placement of the wiper arm with painter's tape
    • Remove the cap on the wiper arm
    • Remove the 15mm nut on the wiper arm
    • Push down on the joint of the arm to loosen it
    • Remove the arm
  2. step : Removing the Wiper Transmission (1:39)
    • Remove the nine pushpins from the cowl
    • Remove the Phillips screws from each corner of the cowl
    • Lift and remove the cowl from its metal clips
    • Disconnect the wiper transmission wiring harness
    • Remove the 10mm bolts from the wiper transmission
    • Lift the wiper transmission up and out
  3. step : Removing the EGR Tube (3:05)
    • Remove the 8mm bolts from the EGR Tube flange
    • Pull the top of the EGR tube out and remove the tube
  4. step : Removing the EGR Valve (4:45)
    • Remove the two 10mm bolts from the EGR valve
    • Press the red safety tab off the side and release the connector
    • Remove the EGR valve
  5. step : Installing the EGR Valve (7:31)
    • Insert the EGR valve and gasket into the engine head
    • Tighten the 10mm bolts to the EGR Valve
    • Connect the wiring harness and engage the red safety tab
  6. step : Installing the EGR Tube (8:34)
    • Reinstall the EGR Tube
    • Tighten the 8mm bolts to the EGR tube and gasket
  7. step : Installing the Wiper Transmission (9:22)
    • Insert the wiper transmission into place
    • Tighten the 10mm bolts to the transmission
    • Connect the wiring harness
    • Press the cowl panel into place
    • Tighten the Phillips screws to the cowl panel
    • Press on the pushpins
  8. step : Installing the Wiper Arm (11:12)
    • Insert the wiper arm to the studs
    • Tighten the 15mm bolt
    • Press on the wiper arm cover

Tools needed for replacement:

    Ratchets & Related

  • Swivel
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 15mm Socket

  • Specialty Tools

  • Trim Tool Set

2.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Egr valve
Unfortunately I received a defective egr valve from the company and had to take my Dodge magnum to the dealership and get the part from Mopar (Dodge dealership only uses Mopar replacement parts) now my magnum is running like it should! I will say the refund process with 1AAuto was a breeze, I explained the problem and the money was back in my account in 5 days.
August 21, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chrysler 300 EGR Valve V6 3.5L
  • 2009-2010 Dodge Challenger EGR Valve V6 3.5L
  • 2006-2010 Dodge Charger EGR Valve V6 3.5L
  • 2005-2008 Dodge Magnum EGR Valve V6 3.5L
  • 2005 Dodge Stratus EGR Valve V6 2.7L

This part replaces:

  • OE # 4593563AA, 4593574AA, 4593574AC, 4593820AA, 4593820AB, 4593834AA, 4593834AC, 4593892AA, 4627320AA
  • Standard Motor Products EGV843
Part #: 1AEGR00244

How-to Video:

(12:16 min)