Replaces

Dodge Ram Headlight Set

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Headlight (0:24)
    • Open the hood
    • Remove the push pin from the wheel well panel with a trim tool or flat blade screwdriver
    • Pull back the wheel well panel
    • Release the headlight lever behind the wheel well
    • Remove the 10mm bolt from the bottom of the headlight using a long extension
    • Remove the 10mm bolt from the top of the headlight
    • Pull the headlight out starting at the outside
    • Disconnect the headlight electrical connectors
    • Unclip the wiring harnesses from the headlight
  2. step : Installing the Headlight (4:11)
    • Connect the headlight electrical connectors
    • Clip the wiring harnesses to the headlight
    • Slide the grille side of the headlight behind the grille
    • Line up the headlight pins
    • Push in the headlight pins
    • Apply painters tape to the head of one 10mm bolt
    • Install the 10mm bolt at the bottom of the headlight using a long socket extension
    • Install the 10mm bolt at the top of the headlight
    • Clip the white lever onto the back of the headlight
    • Close the wheel well panel
    • Push the clip into the wheel well panel

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Swivel

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Are the bulbs included?
Shawn C August 4, 2019
No, I just swapped the ones I had. They look great!
Henry W August 4, 2019
no u can use your old one make sure you dont touch them and make sure you know what light is the high and low beam just hook it up the way you take the old ones out thanks
Reefers O August 5, 2019
Thanks for your inquiry! New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, youll want to replace them with your original bulbs or with new bulbs.
Emma F August 5, 2019
does this light adjust right to left and left to right ?
George U September 17, 2019
These lights are able to adjust side to side. Please let us know if you have any further questions.
Emma F September 17, 2019
does this light adjust rt. to left and left to rt.?
George U September 17, 2019
These lights are able to adjust side to side. Please let us know if you have any further questions.
Emma F September 17, 2019
does this light adjust right to left and left to right?
George U September 17, 2019
These lights are able to adjust side to side. Please let us know if you have any further questions.
Emma F September 17, 2019
How to adjust beam left to right on headlight?
K K January 2, 2020
This assembly will come with adjustment knobs on the back of the housing that will adjust the parts up and down and side to side. Please do not hesitate to contact us with any further questions.
Emma F January 2, 2020
How to adjust beam left or right on headlight?
K K January 2, 2020
This assembly will come with adjustment knobs on the back of the housing that will adjust the parts up and down and side to side. Please do not hesitate to contact us with any further questions.
Emma F January 2, 2020
2 questions - what bulbs are needed (bulbs types please), and can the headlights be adjusted up and down? I see they can be adjusted left and right.
Lance H January 3, 2020
Thank you for the inquiry. The high beam bulb size is 9005, and low beam bulb size is H11. These will also adjust the same way that your original headlights adjust.
Ian P January 3, 2020
HOW DO YOU ADJUST THE HEADLIGHT UP AND DOWN?
Jim W February 24, 2020
Thank you for your inquiry. There is an adjuster screw installed onto the back of the headlight assembly that will allow the adjustment. Please let us know if you have any further questions.
Anthony C February 24, 2020
These are aftermarket lights and fit just as OE headlights do but may have some differences such as the adjusters being on the back instead of the tops.
Christa R February 25, 2020

Fits the following Makes:

Year Make Model Description
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck with Quad Headlights Headlight Set
2010Dodge Ram 2500 Truck Dodge Ram 2500 Truck with Quad Headlights Headlight Set
2010Dodge Ram 3500 Truck Dodge Ram 3500 Truck with Quad Headlights Headlight Set
2011-2018Ram 1500 Truck Ram 1500 Truck with Quad Headlights Headlight Set
2011-2018Ram 2500 Truck Ram 2500 Truck with Quad Headlights Headlight Set
2011-2018Ram 3500 Truck Ram 3500 Truck with Quad Headlights Headlight Set
Part 1ALHP01264
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.