MPIMX00009-Dodge Ram 1500 2500 3500 Passenger Side A-Pillar Trim with Pull Handle

Replaces

Dodge Ram 1500 2500 3500 Passenger Side A-Pillar Trim with Pull Handle Mopar 1TE74BD1AA

MPIMX00009

Part Details

  • Color: Gray
  • Finish: Paint to Match

This part replaces:

  • OE # 1TE74BD1AA
FREE SAME DAY SHIPPING
Save 36%
List: $148.95 Save: $54.00
Part MPIMX00009

Out of Stock

Free GROUND SHIPPING

Close



Brand #: 1TE74BD1AA
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Color:   Gray
  • Finish:   Paint to Match

MOPAR A-PILLAR INTERIOR TRIM: 1TE74BD1AA

This A-pillar trim is a genuine Mopar replacement part! It is the very same part you would receive if purchased from your local Dodge dealer!

Specifications:

  • Brand New Mopar A-Pillar Trim
  • Fits RH (Passenger Side) FRONT
  • Gray Finish
    • Buyer can paint to any color desired or install as is
  • Direct replacement
  • Built to strict quality control standards

Now you can have an original equipment Mopar A-pillar trim shipped right to your door!

Paint To Match Note:

"Paint-to-match finish" refers to a smooth, paintable surface. This item will not ship painted. Paint offers better coverage and adhesion, but it is not necessary for installation.

OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the A Pillar (0:33)
    • Pry out the trim buttons with a pick
    • Remove the two 10mm bolts in the pillar
    • Pop the A Pillar down and out
    • Pull the A Pillar up and out of the dash
  2. step : Installing the A Pillar (1:58)
    • Press the A Pillar into the dash
    • Snap the A Pillar into place
    • Tighten the 10mm bolts to the A Pillar
    • Press on the trim buttons

Tools needed for replacement:

    General Tools

  • Pick

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 10mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2008Dodge Ram 1500 Truck Dodge Ram 1500 Truck Passenger Side A-Pillar Trim with Pull Handle
2006-2009Dodge Ram 2500 Truck Dodge Ram 2500 Truck Passenger Side A-Pillar Trim with Pull Handle
2006-2009Dodge Ram 3500 Truck Dodge Ram 3500 Truck Passenger Side A-Pillar Trim with Pull Handle

Part Interchange

Brand Label Part Number
DIY Solutions RES00894

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Brand #: 1TE74BD1AA
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Ram 1500 2500 3500 Passenger Side A-Pillar Trim with Pull Handle Mopar 1TE74BD1AA-MPIMX00009 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.