Replaces

Dodge Chrysler Plymouth Eagle Ignition Coil TRQ - 1AECI00008

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

The ignition coil is a crucial part of your ignition system. It's function is to convert the 12 volt power of your vehicle's electrical system in to 35,000 or more volts. This produces a high intensity spark at the spark plug which then ignites the fuel in the cylinder. Coils in general will wear out over time. This will cause a misfire condition where the car looses power especially at higher engine RPM.

This Ignition Coil features the following specifications:

  • New not remanufactured
  • Built to strict quality control standards
  • Direct replacement
  • 100% factory tested

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Direct Fit Replacement

Guaranteed to fit and function properly for your specific application.

Optimum Performance

Meets or exceeds requirements of the vehicle. Provides the correct primary and secondary resistance, voltage output, and spark energy needed to restore original operating condition.

Premium Quality

Manufactured with quality materials to meet highest quality control standards in the industry.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (0:53)
    • Disconnect the negative battery cable with a 10mm wrench
  2. step : Removing the Air Intake Hose (1:09)
    • Loosen the intake hose clamps with a flat blade screwdriver
    • Pull off the air intake hose
  3. step : Removing the Ignition Coil (1:26)
    • Disconnect the ignition coil wiring harness
    • Disconnect the spark plug wires from the ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the new coil
    • Remove the four 10mm bolts from the ignition coil
    • Pull off the ignition coil
  4. step : Installing the Ignition Coil (3:47)
    • Disconnect the spark plug wires from the new ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the old coil
    • Put the new ignition coil into place
    • Insert the four 10mm bolts into the ignition coil
    • Disconnect the spark plug wires from the old ignition coil, one at a time
    • Connect the plug wires to the corresponding spot on the new coil
    • Connect the ignition coil wiring harness
  5. step : Installing the Air Intake Hose (7:14)
    • Put the intake hose into place
    • Tighten the intake hose clamps by hand
  6. step : Reconnecting the Battery (7:54)
    • Connect the negative battery cable with a 10mm wrench

Tools needed for replacement:

    Ratchets & Related

  • 1/4 Inch Ratchet
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
I have a 99 town and country 3.8 my coil looks like this type with this type of connector. Yet I cannot find this for a 99. Do I order one for a 98?
W E August 5, 2019
Thanks for contacting us. This part will not fit your vehicle, but we do have a part that will! You can see the correct part at this link: https://www.1aauto.com/dodge-chrysler-plymouth-ignition-coil-trq-ica61801/i/1aeci00211
Jessica D August 6, 2019
Year Make Model Description
1993-1996Chrysler Concorde Chrysler Concorde V6 3.3L Ignition Coil
1993-1997Chrysler Concorde Chrysler Concorde V6 3.5L Ignition Coil
1992Chrysler Fifth Avenue Chrysler Fifth Avenue V6 3.3L Ignition Coil
1992Chrysler Fifth Avenue Chrysler Fifth Avenue V6 3.8L Ignition Coil
1990-1991Chrysler Imperial Chrysler Imperial V6 3.3L Ignition Coil
1991-1993Chrysler Imperial Chrysler Imperial V6 3.8L Ignition Coil
1994-1997Chrysler LHS Chrysler LHS V6 3.5L Ignition Coil
1990-1993Chrysler New Yorker Chrysler New Yorker V6 3.8L Ignition Coil
1990-1993Chrysler New Yorker Chrysler New Yorker V6 3.3L Ignition Coil
1994-1996Chrysler New Yorker Chrysler New Yorker V6 3.5L Ignition Coil
1990-1998Chrysler Town & Country Chrysler Town & Country V6 3.3L Ignition Coil
1994-1998Chrysler Town & Country Chrysler Town & Country V6 3.8L Ignition Coil
1990-1998Dodge Caravan Dodge Caravan V6 3.3L Ignition Coil
1996-1998Dodge Caravan Dodge Caravan V6 3.8L Ignition Coil
1990-1993Dodge Dynasty Dodge Dynasty V6 3.3L Ignition Coil
1990-1998Dodge Grand Caravan Dodge Grand Caravan V6 3.3L Ignition Coil
1994-1998Dodge Grand Caravan Dodge Grand Caravan V6 3.8L Ignition Coil
1993-1997Dodge Intrepid Dodge Intrepid V6 3.5L Ignition Coil
1993-1997Dodge Intrepid Dodge Intrepid V6 3.3L Ignition Coil
1993-1997Eagle Vision Eagle Vision V6 3.3L Ignition Coil
1993-1997Eagle Vision Eagle Vision V6 3.5L Ignition Coil
1990-1998Plymouth Grand Voyager Plymouth Grand Voyager V6 3.3L Ignition Coil
1994-1995Plymouth Grand Voyager Plymouth Grand Voyager V8 3.8L Ignition Coil
1991-1998Plymouth Voyager Plymouth Voyager V6 3.3L Ignition Coil
1998Plymouth Voyager Plymouth Voyager V8 3.8L Ignition Coil
Part 1AECI00008
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: ICA61663