FPEGS00017-Dodge Chrysler Intake Manifold Gasket Set

Replaces

Dodge Chrysler Intake Manifold Gasket Set FEL-PRO MS91473

FEL-PRO FPEGS00017 FPEGS00017
FREE SAME DAY SHIPPING
Save 33%
List: $35.95 Save: $12.00
Only 4 left in stock
Part FPEGS00017
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

FELPRO
Brand #: MS91473

Frequently bought together

Description

Vehicle Fit

Warranty & Shipping
How-To & Tools

Item Condition: New

Wear and Tear

This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories.  Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses.  Final shipping costs are available at checkout.

How to Replace Intake Manifold Gasket Set 01-09 Chrysler Sebring Dodge Stratus

Created on: 2021-01-16

Learn how to replace the intake manifold gasket on your 01-09 Chrysler Sebring or Dodge Stratus with this helpful video from 1A Auto.

  1. step 1 : Release the pressure from the fuel system
    • With the engine running, remove the fuel pump relay from the fuse block.
    • This will stop the engine and release the pressure in the fuel system.
  2. step 2 : Remove the upper intake manifold.
    • Use a 10 mm socket and ratchet to remove the upper intake manifold.
    • Disconnect the air pressure sensor.
    • Remove the 8 ten mm bolts.
  3. step 3 : Remove the air box
    • Loosen the clamp and the bolt securing the air box.
    • Disconnect the hose and wiring harness.
    • Remove the 13 mm bolt that goes into the throttle body and brace.
    • Pull the gasket off the top of the cowl and now you can remove your intake manifold.
  4. step 4 : Remove the lower intake manifold.
    • Pry up the gaskets.
    • Remove the four 10 mm bolts under the intake manifold to get at the fuel rails.
    • Disconnect the throttle position sensor if you need to.
    • Pull the fuel rails up and out.
    • Stuff a clean rag in the intake to keep anything from falling into it. (this would be bad)
    • Disconnect the wiring harness connectors from the injector.
    • Remove the lower intake manifold, having someone help hold the upper intake manifold out of the way.
    • Use a vacuum to remove any debris.
    • Remove the lower intake manifold gaskets.
    • Install the new gaskets.
  5. step 5 : Reassemble the intake manifold
    • Replace your lower intake manifold.
    • Push your fuel rails back into place.
    • Apply some loc-Tite to the four 10 mm bolts and snug them down with a socket and ratchet.
    • Bolt down the intake manifold.
    • Torque the 10 mm bolts to 105 inch/pounds, alternating the bolts you tighten working from the center out.
  6. step 6 : assemble everything else
    • Reconnect the air pressure sensor
    • Bolt in the 13 mm bolts securing the bracket to the throttle body, and torque to 15 foot/lbs
    • Reinstall the air box.
    • Tighten the clamp that connects the intake to the throttle body
    • Reconnect the hose and double check all of your sensors are connected.
    • Reinstall the fuel pump relay.
    • Seat the cowl gasket.

Tools needed for replacement

  • Materials, Fluids, and Supplies

    Liquid Thread Locker

  • Ratchets & Related

    Socket Extensions

    Torque Wrench

    Ratchet

  • Screwdrivers & Related

    Flat Blade Screwdriver

  • Sockets - Metric

    13mm Socket

    10mm Socket

Installation Video
Watch video

Fits these Makes

Year Make Model Description
2005-2009Chrysler 300 Chrysler 300 V6 2.7L Intake Manifold Gasket Set
1998-2004Chrysler Concorde Chrysler Concorde V6 2.7L Intake Manifold Gasket Set
2001-2009Chrysler Sebring Chrysler Sebring V6 2.7L Intake Manifold Gasket Set
2008-2009Dodge Avenger Dodge Avenger V6 2.7L Intake Manifold Gasket Set
2006-2009Dodge Charger Dodge Charger V6 2.7L Intake Manifold Gasket Set
1998-2004Dodge Intrepid Dodge Intrepid V6 2.7L Intake Manifold Gasket Set
2005-2008Dodge Magnum Dodge Magnum V6 2.7L Intake Manifold Gasket Set
2001-2006Dodge Stratus Dodge Stratus V6 2.7L Intake Manifold Gasket Set

Part Interchange

Brand Label Part Number
DIY Solutions ENG00538

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FELPRO
Brand #: MS91473
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this fit 3.5 V6? I know it says 2.7 liter only but Id just like to double check.
January 2, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Chrysler Intake Manifold Gasket Set FEL-PRO MS91473-FPEGS00017 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.