MPEGR00001-Dodge Chrysler EGR Valve


Dodge Chrysler EGR Valve Mopar 4593892AA

Save 31%
List: $222.95 Save: $68.00
Part MPEGR00001

Out of Stock



Brand #: 4593892AA
Vehicle Fit
Warranty & Shipping
How-To & Tools



  • Brand New EGR Valve
  • Replaces dealer part numbers: 4593563AA, 4593574AA, 4593574AC, 4593820AA, 4593820AB, 4593834AA, 4593834AC, 4593892AA, 4627320AA
  • Direct Fit
  • Built to strict quality control standards

If your vehicle is running rough or has failed emissions due to a bad EGR valve then this is the part for you.

The EGR valve in your vehicle is a critical part of the emission reduction system on your vehicle. At certain throttle levels the valve allows exhaust gasses to recirculate through the engine combustion process. This process is key in reducing Nitrogen Oxide emissions.


OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

  1. step : Removing the Wiper Arm (0:49)
    • Mark the placement of the wiper arm with painter's tape
    • Remove the cap on the wiper arm
    • Remove the 15mm nut on the wiper arm
    • Push down on the joint of the arm to loosen it
    • Remove the arm
  2. step : Removing the Wiper Transmission (1:39)
    • Remove the nine pushpins from the cowl
    • Remove the Phillips screws from each corner of the cowl
    • Lift and remove the cowl from its metal clips
    • Disconnect the wiper transmission wiring harness
    • Remove the 10mm bolts from the wiper transmission
    • Lift the wiper transmission up and out
  3. step : Removing the EGR Tube (3:05)
    • Remove the 8mm bolts from the EGR Tube flange
    • Pull the top of the EGR tube out and remove the tube
  4. step : Removing the EGR Valve (4:45)
    • Remove the two 10mm bolts from the EGR valve
    • Press the red safety tab off the side and release the connector
    • Remove the EGR valve
  5. step : Installing the EGR Valve (7:31)
    • Insert the EGR valve and gasket into the engine head
    • Tighten the 10mm bolts to the EGR Valve
    • Connect the wiring harness and engage the red safety tab
  6. step : Installing the EGR Tube (8:34)
    • Reinstall the EGR Tube
    • Tighten the 8mm bolts to the EGR tube and gasket
  7. step : Installing the Wiper Transmission (9:22)
    • Insert the wiper transmission into place
    • Tighten the 10mm bolts to the transmission
    • Connect the wiring harness
    • Press the cowl panel into place
    • Tighten the Phillips screws to the cowl panel
    • Press on the pushpins
  8. step : Installing the Wiper Arm (11:12)
    • Insert the wiper arm to the studs
    • Tighten the 15mm bolt
    • Press on the wiper arm cover

Tools needed for replacement:

    Ratchets & Related

  • Swivel
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 15mm Socket

  • Specialty Tools

  • Trim Tool Set

Fits the following Makes:

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 V6 3.5L EGR Valve
2005Chrysler Sebring Chrysler Sebring V6 2.7L EGR Valve
2009-2010Dodge Challenger Dodge Challenger V6 3.5L EGR Valve
2006-2010Dodge Charger Dodge Charger V6 3.5L EGR Valve
2005-2008Dodge Magnum Dodge Magnum V6 3.5L EGR Valve
2005Dodge Stratus Dodge Stratus V6 2.7L EGR Valve

Part Interchange

Brand Label Part Number
DIY Solutions ESS00967

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: 4593892AA
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Dodge Chrysler EGR Valve Mopar 4593892AA-MPEGR00001 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.