MNSSP00896-Dodge Charger Magnum Chrysler 300 Front & Rear Shock & Strut Kit

Replaces

Dodge Charger Magnum Chrysler 300 Front & Rear Shock & Strut Kit Monroe Sensa-Trac MNSSP00896

MNSSP00896
FREE SAME DAY SHIPPING
Save 30%
List: $714.95 Save: $215.00
Part MNSSP00896

Out of Stock

Free GROUND SHIPPING

Close



Monroe Sensa-Trac
Brand #: MNSSP00896
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Why Buy Monroe Sensa-Trac Shock and Struts?

Monroe Sensa-Trac Shock Absorbers and Struts are designed to be direct replacements while improving handling. Some of their benefits include:

  • Application specific valving
  • Improved filtering of road noise, vibration, and harshness
  • Nitrogen gas charged
  • Upgraded sealing for longer life

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Rear Shock Absorber (1:56)
    • Remove the two 16mm bolts at the top of the shock absorber
    • Compress the shock
    • Pull out the top of the shock
    • Remove the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Pull out the shock
    • Hold the shock stud with vise grip pliers
    • Remove the 15mm nut from the top of the shock
    • Remove the shock mount from the shock
  3. step : Installing the Shock (4:46)
    • Remove the 15mm nut from the top of the new shock
    • Remove the washers from the new shock
    • Put the shock mount onto the new shock, with the rubber pointing out
    • Put the appropriate washer onto the shock stud
    • Fasten the 15mm nut onto the shock stud
    • Put the shock into place, top first
    • Compress the shock
    • Line up the shock with the lower control arm
    • Install the bottom shock bolt
    • Start the nut onto the bottom shock bolt
    • Fasten the bottom shock bolt with an 18mm wrench and a 15mm socket and ratchet
    • Tighten the bottom shock bolt to 53 foot-pounds of torque
    • Start the two 16mm bolts into the shock mount
    • Tighten the two 16mm bolts to 38 foot-pounds
  4. step : Installing the Wheel (6:40)
    • Put the wheel into place
    • Start the lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Gloves

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 17mm Wrench
  • 15mm Wrench
  • 18mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2010Chrysler 300 Chrysler 300 Base Model Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2005-2010Chrysler 300 Chrysler 300 Touring Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2005-2010Chrysler 300 Chrysler 300 Limited Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2005-2010Chrysler 300 Chrysler 300 C Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2008-2009Chrysler 300 Chrysler 300 LX Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2009Chrysler 300 Chrysler 300 Signature Series Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2010Chrysler 300 Chrysler 300 S Rear Wheel Drive without Nivomat Self Leveling Suspension Front & Rear Shock & Strut Kit
2006-2010Dodge Charger Dodge Charger Rear Wheel Drive without Nivomat Self Leveling Suspension (without Police Package) without Sport Suspension Front & Rear Shock & Strut Kit
2005-2008Dodge Magnum Dodge Magnum Rear Wheel Drive without Nivomat Self Leveling Suspension (without Police Package) without Sport Suspension Front & Rear Shock & Strut Kit

Part Interchange

Brand Label Part Number
DIY Solutions SHO03720
DIY Solutions SHO03036
DIY Solutions SHO04131

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Monroe Sensa-Trac
Brand #: MNSSP00896
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Dodge Charger Magnum Chrysler 300 Front & Rear Shock & Strut Kit Monroe Sensa-Trac MNSSP00896-MNSSP00896 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.