These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 22702612, 19113681, 19175264
  • Fits 4 Stud Wheels
  • Vented
  • 10.08" (256mm) diameter

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:05)
    • Remove the lug nut covers
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:00)
    • Use a flat blade screwdriver or pry bar to push the pistons in
    • Remove two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:10)
    • Remove two 15mm bolts from the brake caliper bracket using a ratchet and pipe for leverage
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:55)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:37)
    • Remove the brake pad slides from the bracket
    • Clean the slides with a wire brush
    • Push the brake pad slides on
    • Attach the wear indicator to the top of the inside brake pad
    • Install the new brake pads into the bracket with the wear indicator on the upper side
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Clean the piston slides and apply bearing grease
    • Insert the piston slides
    • Thread bolts by hand
    • Tighten bolts to 20 foot--pounds
  7. step : Reattaching the Wheel (8:06)
    • Straighten out the wheel
    • Slide the wheel into place
    • Apply penetrating oil to the wheel studs
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Reattach the lug nut covers
  8. step : Testing the Brakes (8:39)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Brake Rotor Pair for 2008 Chevy Cobalt
They work perfectly, all vibration when braking is completely gone. Most affordable and reliable parts I've seen online.
August 21, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:05 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto 55083

Vehicle Fit

  • 2005-2006 Chevy Cobalt Front Brake Rotor Pair for Models with Rear Drum Brakes Nakamoto
  • 2007-2010 Chevy Cobalt Front Brake Rotor Pair for Models with Rear Drum Brakes & 4 Lug Wheels Nakamoto
  • 2007-2010 Pontiac G5 Front Brake Rotor Pair for Models with Rear Drum Brakes Nakamoto
  • 2005-2006 Pontiac Pursuit Front Brake Rotor Pair for Models with Rear Drum Brakes Nakamoto
  • 2003 Saturn Ion Front Brake Rotor Pair for Models with Rear Drum Brakes Nakamoto
  • 2004-2007 Saturn Ion Front Brake Rotor Pair for Models with Rear Drum Brakes Nakamoto
Part #: 1ABFS00700

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 55083

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More