Part Details

  • Front Brake Rotor Specifications:
    Vented
    12.28" (312mm)
    5 Lug
  • Brake Rotor Type: Cross Drilled & Slotted
  • Quantity: Pair
  • Brake Rotor Coating: Zinc Coated
  • Product Line: Performance

Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 lug wheels
  • 12.28" (312mm) diameter
  • Vented
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nut covers with the supplied lug nut tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (2:34)
    • Remove the spring retainer from the caliper with a flat blade screwdriver and needle nose pliers
    • Pry off the cap from the caliper bolt
    • Remove the 7mm allen bolts from the caliper
    • Disconnect the brake pad sensor
    • Pull the caliper off
    • Secure the caliper with a bungee cord
    • Remove the brake pads
  3. step : Removing the Brake Rotor (5:30)
    • Remove 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx from the rotor
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (9:01)
    • Clean off the caliper bracket with a wire brush
    • Clean off the hub with a wire brush
  5. step : Installing the New Brake Rotor (9:42)
    • Clean the rotor with brake parts cleaner
    • Slide the rotor on
    • Tighten the T30 Torx to the rotor
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 155 newton meters of torque
  6. step : Installing the New Brake Pads (10:50)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the pad surface with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Connect the brake pad sensor
    • Apply brake grease to the slide pin bolts
    • Thread the 7mm Allen slide bolts
    • Tighten bolts to 15 newton meters of torque
    • Press the Allen bolt cover on
    • Tighten the spring to the caliper with needle nose pliers
  7. step : Reattaching the Wheel (14:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 Newton meters in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (15:52)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Gteat deal
Everything came on time. The rotors were half the price of previous ones. I couldnt beat the price anywhere else and free shipping too.
September 6, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2006-2013Audi A3 Audi A3 L4 1.8L Turbo Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2015-2017Audi A3 Audi A3 L4 2.0L Turbo 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2006-2013Audi A3 Quattro Audi A3 Quattro Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2015-2017Audi A3 Quattro Audi A3 Quattro Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2015-2018Audi Q3 Audi Q3 Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2015-2018Audi Q3 Quattro Audi Q3 Quattro Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2008-2011Audi TT Audi TT L4 2.0L Turbo 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2008-2018Audi TT Quattro Audi TT Quattro L4 2.0L Turbo 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2012-2018Volkswagen Beetle VW Beetle L4 2.0L Turbo Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2009-2017Volkswagen CC VW CC Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2007-2016Volkswagen Eos VW Eos Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2006Volkswagen GTI VW GTI L4 2.0L Turbo Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2007-2017Volkswagen GTI VW GTI Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2014Volkswagen Golf VW Golf 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2017Volkswagen Golf Alltrack VW Golf Alltrack Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2005-2006Volkswagen Jetta VW Jetta L4 2.5L 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2006-2015Volkswagen Jetta VW Jetta L4 2.0L Turbo 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2006-2015Volkswagen Jetta VW Jetta 12.28" (312mm) Diameter Front Rotors Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2016-2017Volkswagen Jetta VW Jetta Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2006-2007Volkswagen Passat VW Passat Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2008-2010Volkswagen Passat VW Passat L4 2.0L Turbo Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2012-2017Volkswagen Passat VW Passat Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto
2009-2017Volkswagen Tiguan VW Tiguan Front Cross Drilled & Slotted Zinc Coated Performance Brake Rotor Pair Nakamoto

This part replaces:

  • Nakamoto 34279-DSZ
Part #: 1APBR00145


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 34279-DSZ

How-to Video:

(16:51 min)