These FRONT brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fits 4 Stud Wheels
  • Vented

These FRONT brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove your wheel (1:04)
    • Loosen your lug nuts with a tire iron.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the calipers (1:31)
    • Use a breaker bar and a 14 mm socket to remove the two caliper bolts.
    • With a flat blade screwdriver pry in between the pads and rotor to compress the caliper piston
    • Pull the caliper off the rotor.
    • Remove and discard your old brake pads.
    • Now remove the two 17 mm caliper bracket bolts with a socket and breaker bar.
    • Clean up the caliper bracket with a wire brush.
  3. step : Remove the rotor (4:36)
    • Hit the rotor with penetrating oil
    • Use a hammer and gently but firmly tap it to work the rotor off.
    • Clean up your new rotor with brake cleaner.
    • Put the brake rotor onto the hub.
  4. step : install the calipers (6:23)
    • Mount the caliper brackets.
    • Torque the 17 mm bolts to 95 ft lbs
    • Use a c-clamp to compress the caliper
    • Apply anti-seize grease to the edges of the new brake pads and insert them into the brake bracket.
    • Mount the caliper onto the caliper bracket.
    • Torque the 14 mm bolts to 22 ft lbs.
  5. step : put the wheel back on (9:44)
    • Replace the wheel and hub cap
    • Preliminarily tighten the lug nuts.
    • Lower the vehicle.
    • Torque the lug nuts in a star pattern to 100 ft lbs.
    • Pump your brakes and do 5 and 10 mph test stops before driving the vehicle somewhere.

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:41 min)

Tools List:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket
  • 14mm Socket



This part replaces:

  • Nakamoto 3264

Vehicle Fit

  • 1991-1996 Infiniti G20 Brake Rotor Front Pair Nakamoto
  • 1989-1994 Nissan 240SX Brake Rotor Front Pair with ABS Brakes Nakamoto
  • 1997-1998 Nissan 240SX Brake Rotor Front Pair for Models with 4 Lug Wheels Nakamoto
  • 1990-1991 Nissan Axxess Brake Rotor Front Pair Nakamoto
  • 2000-2006 Nissan Sentra Brake Rotor Front Pair L4 1.8L Nakamoto
  • 1990-1992 Nissan Stanza Brake Rotor Front Pair Nakamoto
Part #: 1ABFS00160

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: 3264

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More