Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:
      Red Filter
      Heat Shield
  • Product Line:   Performance

Specifications:

  • Brand New Performance Cold Air Intake Kit
  • Polished 6061 aluminum tubing
  • 3.5" (89mm) diameter piping
  • Red cone air filter
  • Includes all necessary couplers, clamps, brackets, and hardware to install
  • Built to strict quality control standards

California Emissions Note:

Due to state emissions regulations, we cannot ship this item to the state of California as it is not C.A.R.B (California Air Research Board) approved for use in this state.

Item Condition: New

WARNING:  This product can expose you to chemicals including Cadmium and Cadmium Compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
PAI for 07 Avalanche
I was searching for a PAI for my 07 Chevy Avalanche 5.3 and couldnt understand why they were all so expensive. Found this one on 1AAuto at a reasonable price and took a chance and ordered it. When I received it, it looked like most of the others. Unfortunately, there were no install instructions included. (In all honesty, I already knew there wouldnt be from the Q&A on the product page.) I had printed off the install instructions for the K&N PAI (also noted on the Q&A on the product page) and was planning on using those to guide me. Removal of all the stock parts was a breeze. Unfortunately, the install of the new parts didnt really line up with the K&N instructions. I tried a couple of different set ups, but it seemed the tube was too long. I was ready to give up until I found the install instructions for the AEM Brute Force PAI. This unit is very similar to that one, parts wise, and the pictures were much clearer. After finding these, I had it all installed in less than 30 minutes. All parts were of decent quality, except the supplied large hose clamps. I needed to be gentle tightening these so they did not strip. Also, the largest one they supplied was not big enough to fit over the throttle body with the plastic sleeve in place. I had to reuse the stock clamp, which was a heavier duty clamp anyway so no big deal. There were 2 sheet metal screws supplied which I did not use. Not sure what they were for - maybe to mount the heat shield - but I was able to use 3 of the 4 stock airbox mounting plate screws to attach the heat shield. I removed the 3 screws, left the mounting plate in place, put the heat shield into position and re-installed the 3 stock screws, Thing was solid and no interference with the hood closing. All in all, a nice set-up that Im glad I didnt pay $300 for. Sounds really nice when you step on the gas. Dont notice a big difference in performance but its only been a day. Biggest tip is to use the AEM Brute Force PAI install instructions. This product gets 4 out of 5 stars since I had to go searching for the install instructions.
April 24, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
How does this compare to a K&N?
Matthew M April 22, 2016
Great product, not as fine tuned as K&N but best bang for the buck!!
Brian F April 25, 2016
What about the Maf sensor? Any issues with install?
Spencer W February 24, 2017
At this time we have not heard from our customers of issues with installation of the MAF sensor. We hope that customers who have installed this may further help with this hands on experience.
Alex P February 28, 2017
On my 07 Chevy Avalanche 5.3 I used the stock MAF sensor. It attaches between the cone filter and tube using the stock rubber gasket and clamp on the filter side and the supplied plastic sleeve and large hose clamp on the tube side.
Brian D April 24, 2018
Does it include a new MAFS or do you use the existing one?
Garrett B June 1, 2017
You will need to reuse the existing MAF sensor.
Alex P June 1, 2017
Existing one. Kit comes ready to install. However it did take a min to figure out how to make it all fit together. I also installed a throttle body spacer and it still all fit perfectly.
Jake K June 1, 2017
How do I install this cold air intake, 08 Silverado?
Garrett B June 6, 2017
Does the air filter need to be oiled?
Brian D April 10, 2018
It comes oiled ready to install. When you clean it you will recoil it then...
Jake K April 10, 2018
Cleaned and oiled
Brian R April 11, 2018
Year Make Model Description
2007-2008Cadillac Escalade Cadillac Escalade Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008Cadillac Escalade ESV Cadillac Escalade ESV Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008Cadillac Escalade EXT Cadillac Escalade EXT Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008Chevy Avalanche Chevy Avalanche Performance Air Intake Kit with Heat Shield & Red Filter
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 5.3L
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 6.0L
2007Chevy Silverado 1500 Chevy Silverado 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 4.8L
2008Chevy Silverado 1500 Chevy Silverado 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 5.3L
2008Chevy Silverado 1500 Chevy Silverado 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 6.0L
2008Chevy Silverado 1500 Chevy Silverado 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 4.8L
2007-2008Chevy Suburban 1500 Chevy Suburban 1500 Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008Chevy Suburban 2500 Chevy Suburban 2500 Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008Chevy Tahoe Chevy Tahoe Performance Air Intake Kit with Heat Shield & Red Filter
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 4.8L
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 5.3L
2007GMC Sierra 1500 GMC Sierra 1500 New Body Style Performance Air Intake Kit with Heat Shield & Red Filter V8 6.0L
2008GMC Sierra 1500 GMC Sierra 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 4.8L
2008GMC Sierra 1500 GMC Sierra 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 5.3L
2008GMC Sierra 1500 GMC Sierra 1500 Performance Air Intake Kit with Heat Shield & Red Filter V8 6.0L
2007-2008GMC Yukon GMC Yukon Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008GMC Yukon XL 1500 GMC Yukon XL 1500 Performance Air Intake Kit with Heat Shield & Red Filter
2007-2008GMC Yukon XL 2500 GMC Yukon XL 2500 Performance Air Intake Kit with Heat Shield & Red Filter
Part #: 1APAI00236


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout