Replaces

2010-15 Chevy Camaro Rear Wheel Bearing & Hub Assembly Timken HA590348 - TKSHR00203

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

TIMKEN WHEEL BEARING & HUB ASSEMBLY: HA590348

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 13500401
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • New wheel studs installed
  • Direct replacement
  • Built to strict quality control standards

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:56)
    • Loosen the 22mm lug nuts
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Separating the Axle from the Hub (1:19)
    • Put the transmission in gear
    • Put the parking brake on
    • Loosen the 32mm axle nut
    • Remove the axle nut
    • Loosen the axle spines with a hammer and punch
  3. step : Removing the Brakes (1:54)
    • Remove the two 16mm bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with bungee cords
    • Remove the T30 Torx screw from the brake rotor
    • Release the parking brake
    • Tap the face of the rotor with a hammer to loosen it
    • Pull off the brake rotor
  4. step : Removing the Hub (3:12)
    • Remove the four 13mm bolts that hold the hub to the wheel spindle
    • Apply a two-jaw puller to the hub
    • Tighten the puller with a socket and ratchet
    • Remove the two-jaw puller
    • Pull the hub off the axle
    • Pull the washer off the axle with a pick
  5. step : Installing the Hub (4:21)
    • Slide the new washer onto the axle
    • Slide the bearing splines onto the axle
    • Start the four 13mm bolts that hold the hub to the wheel spindle
    • Tighten the 13mm bolts to 85 foot-pounds of torque
  6. step : Installing the Brakes (5:04)
    • Put the rotor into place
    • Insert the T30 screw into the rotor
    • Remove the bungee cord from the caliper
    • Put the caliper into pace
    • Start the two 16mm bolts into the caliper
    • Tighten the 16mm bolts to 30 foot-pounds
    • Tighten the 16mm bolts 90 degrees further
  7. step : Installing the Wheel (5:59])
    • Start the axle nut onto the axle
    • Tighten the axle nut to 200 foot-pounds
    • Slide the wheel into place
    • Start the five 22mm lug nuts
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Pick
  • Floor Jack
  • Funnel

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • 2 Jaw Gear Puller

  • Star Drivers & Sockets

  • T30 Bit

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2015Chevy Camaro Chevy Camaro (excluding ZL1 Models) V8 6.2L Rear Wheel Bearing & Hub Assembly
2010-2015Chevy Camaro Chevy Camaro V6 3.6L Manual Transmission Rear Wheel Bearing & Hub Assembly
Only 1 left in stock
Part TKSHR00203
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Timken
Brand #: HA590348