This replacement front Parking Turn Signal light is just what you need to get your vehicle in good looking form again!

Specifications:

  • LH (Driver Side)
    • Front Bumper Mounted
  • Replaces dealer part number: 25778618, 20794799
  • Direct replacement
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Built to strict quality control standards

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Accessing the Parking Light (0:39)
    • Remove the two T20 Torx screws from the wheel well
    • Remove the two T20 screws from below the bumper
    • Remove the 7mm bolt from the wheel well
    • Remove the 10mm bolt underneath the bumper
    • Pull down the splash shield
  2. step : Servicing the Parking Light Bulbs (1:24)
    • Twist the bulb sockets out the light
    • Pull the bulbs off of the socket
    • Push on the new bulbs
    • Twist the bulb sockets into the light
  3. step : Removing the Parking Light (1:47)
    • Remove the four 7mm bolts from the parking light
    • Disconnect the parking light wiring harness
    • Pull the light down and out
  4. step : Installing the New Parking Light (2:00)
    • Put the new parking light into place
    • Insert the four 7mm bolts into the parking light
    • Connect the parking light wiring harness
  5. step : Reinstalling the Splash Shield (2:17)
    • Put the splash shield into place
    • Insert the two T20 screws underneath the bumper
    • Insert the 10mm bolt underneath the bumper
    • Insert the 7mm bolt in the wheel well
    • Insert the two T20 screws in the wheel well

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 7mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Perfect just what I neede
Part worked great. The online video made the replacement much easier. Only problem was a delay in the delivery which was not A-1's fault.
August 29, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2009-2012 Chevy Traverse Front Parking Light Driver Side

This part replaces:

  • OE # 20794799
  • OE # 25778618
  • Partslink GM2520194
  • Hollander 116-01312L
  • DEPO 335-1612L-AF
Part #: 1ALPK01035

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:09 min)