2008-16 Ford Tail Light Pair DIY Solutions

This is a direct replacement tail light set for your vehicle. They install just as your originals do. If your tail lamps have been damaged broken or cracked, then these lights are your answer.

Specifications:

• Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side)
• Rectangular Style
• Replaces dealer part numbers: 7C3Z-13404-A, 7C3Z-13405-A, 7C3Z13404A, 7C3Z13405A
• Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
• Bulbs and wiring not included
• Fit Super Duty F250 or F350 only
  • Do NOT fit Chassis Cab Models

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Direct fit replacement for OEM assembly

Uses same wiring as original assembly.  No cutting or splicing required.

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

step : Removing the Tail Light (0:44)

• Remove the two 8mm bolts on the backside of the housing
• Pull the tail light out
• Disconnect the connectors

step : Installing the Tail Light (1:15)

• Connect the connectors
• Press the tail light into the bed
• Tighten the two 8mm bolts to the tail light