2007-09 Toyota Camry Fog Light Kit DIY Solutions

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Light Option:   Clear Lens


  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Factory style add-on upgrade 
  • Clear Lens
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Includes wiring, brackets, bulbs, relay, and switch

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Disconnecting the Battery and Removing the Fender Liner (2:30)
    • Disconnect the negative battery terminal with a 10mm socket and ratchet
    • Place the negative terminal to the side
    • Remove the 10mm bolts from the fender liner
    • Pry out the push clips in the fender liner with a trim tool or Phillips head screwdriver
    • Remove the fender liner
  2. step : Removing the Lower Splash Shield (3:40)
    • Remove the 10mm bolts from the lower splash shield
    • Remove the splash shield
  3. step : Installing the Fog Light Lens (3:55)
    • Press in the tabs and remove the cap from the bumper
    • Insert the fog light into place with two mounts in the clip slots
    • Tighten a Phillips screw to the fog light
    • Press the bezel into the bumper
    • Repeat for the passenger side
  4. step : Wiring the Fog Light (5:25)
    • Insert the passenger side wiring harness connection into the opening on the front radiator support
    • Thread the wire behind the bumper cover, through the radiator support, until it reaches the passenger side
    • Slide the connector through the opening on the front radiator support on the passenger side
    • Connect the connector to the passenger side fog light
    • Wire-tie the wire to the radiator support
    • Connect the connector to the driver side fog light
    • Loosen the 10mm bolt on the headlight ground wire
    • Insert the fog light ground wire
    • Tighten the 10mm bolt
    • Insert the relay power wire and fuse up into the opening in the engine compartment, near the bottom of the battery
    • Route the power wire/ground beneath the plastic next to the battery
    • Slide it through the collar near the positive terminal
    • Loosen the positive battery terminal with a 10mm socket and ratchet
    • Connect it to the positive terminal
    • Tighten the positive terminal with a 10mm socket and ratchet
    • Zip-tie the wire out of the way from other components that could damage it
    • Place the trigger wire for the relay onto the hook in the wheel well
    • Punch a hole in the rubber boot and thread the cable through the wheel well
    • Strip the connect-a-fuse
    • Connect the fuse to the wiring harness with a butt connector or solder and heat shrink
    • Remove the 15A TAIL fuse with needle nose pliers
    • Connect the connect-a-fuse to the 15A TAIL fuse slot
    • Connect the trigger wire to the harness and connect-a-fuse
  5. step : Installing the Fog Light Switch (17:55)
    • Pry out the trim door beneath the mirror switch on the dash panel
    • Unplug the connect-a-fuse and trigger wire
    • Insert the wires through the opening in the dash panel
    • Press the switch into the panel
    • Connect the wiring harness to the fog light switch
    • Pop off the door sill
    • Unscrew the clip from the driver side kick panel
    • Pop open the driver side kick panel
    • Loosen the 10mm bolt from the ground
    • Attach the fog light ground
    • Tighten the 10mm bolt
    • Connect the fuse to the 15A TAIL slot
    • Connect the trigger wire
    • Tuck the wiring in behind the kick panel
    • Carefully bunch the wiring and zip-tie it
    • Press the kick panel on
    • Screw in the kick panel clip
    • Press on the door sill panel
    • Zip-tie any wiring behind the fog light in the wheel well
  6. step : Reinstalling the Fender Liner and Splash Shield (24:48)
    • Tighten the 10mm bolts to the fender liner
    • Press the push clips to the fender liner
    • Insert the splash shield
    • Tighten the bolts to the splash shield
  7. step : Reconnecting the Negative Battery Terminal and Testing the Fog Lights (25:36)
    • Reconnect the negative battery terminal with a 10mm socket and ratchet
    • Turn the headlights on
    • Test the fog light

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper
  • Jack Stands
  • Pick
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set
  • Solder Kit

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
what kind of bulb comes with the kit and are any choices of bulb upgrade like an led ?
Dino R November 15, 2018
I don’t know what kind of bulb it comes with but I can tell you that it is very bright. It is a very good kit and works exactly like I wanted them to.
C A November 15, 2018
These come with halogen bulbs, which cannot be upgraded to LED.
Christa R November 15, 2018
They seem to be same as the low beam headlight bulbs. You may be able to find LED conversion kit for the fog lights or headlights in Amazon or maybe in this website.
Y A November 18, 2018

Fits the following Makes:

Year Make Model Description
2007-2009Toyota Camry Toyota Camry Upgrade Fog Light Kit

Part Interchange

Brand Label Part Number
DIY Solutions LHT01113
Lexus 81210-0D042
Lexus 812100D042
Lexus 812200D042
Lexus 81220-0D042
Partslink SC2593100
Partslink SC2592100
Toyota 81220-0D042
Toyota 812100D042
Toyota 812200D042
Toyota 81210-0D042

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Product Reviews
5.00/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I am happy to say that the addition of the fog lights is a god send of safety in driving on back roads in Connecticut. Camry 2009 low beam lights are horrible and when we added the fog lights what a difference it made. Feel safe driving now and see the edges of the road. Hate when people get these blue ultra bright lights that just blind you. Now with these fog lights I can look to the side and feel comfortable passing these blue lights without difficulty. Thanks for a great product.
January 27, 2018
Great aftermarket parts
I received great aftermarket parts which fit right and work effectively
December 3, 2018
07 Camry Fog light kit
I am a first time customer. I was pleased to see that 1A had an EXACT fit for my car. I have not installed them yet (hope to this weekend), but was very pleased with customer service, the ordering process, the expedited shipping, and the condition of the product once received. The installation video 1A has on their website is very detailed and will be a TREMENDOUS help when I install the lights. Thank you 1A Auto!! I highly recommend 1A and will be ordering parts from them in the future.
March 13, 2019
08 Camry Adding Driving Lights- super simple
After watching the video, I understood the steps to install. I was removing the bumper cover to replace the yellowed headlight assemblies and this was the perfect time to add driving lights. The plastic inserts fit perfectly and securely. Excellent quality light assembly too. Ran the wires as shown in video matching the length of the factory driving light connectors bundled in there. When it was time, positioned the bumper cover close enough to connect the lights and fastened the cover back in place. I didn’t want to remove the steering wheel to replace the turn signal stalk so I used the included wiring relay with fuse. Taped into the brown wire on one headlight to trigger the relay for automatic control. No under dash work required, one wire to battery positive and one wire to clean UN-painted body ground on passenger side. I zip tied the fuse holder to the relay and mounted both together. This simple inexpensive upgrade adds safety and makes the front look complete. Now I can see the raccoons and tire gators.
April 18, 2019
This kit was awesome! Easy to install ! Just the right amount of cable ,well thought-out! And with theyre installing video its was easy peasy!.
April 15, 2020
Only 9 left in stock
Part 1ALFZ00098
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: LHT01113