Replaces

2005-06 Nissan Altima Headlight Pair - 1ALHP01097

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   with Bulbs & Ballast
  • Quantity:   Pair
  • Light Option:   HID (High-Intensity Discharge)

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part numbers: 26010-ZB725, 26060-ZB725, 26060ZB725, 26010ZB725
  • Includes lens & housing
  • Bulbs and Ballast included
  • Fits SE-R models with Xenon HID (High Intensity Display) Headlights only
    • Does NOT fit models with Halogen Style Headlights
    • Will fit other models equipped with HID Headlights
This headlight set is a great replacement and has good cost savings over a headlight pair from the dealer.

H.I.D. Ballast Note:

These Headlights are designed to be used with the supplied ballasts. 

Fit guaranteed
  • This pair of headlamps will install just as your originals do. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight set should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing discolored, scratched, dull or damaged headlights with a new pair from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new pair of headlights can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new pair of headlights from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Bumper Cover (0:40)
    • Remove the six push clips with a prying tool
    • Turn the wheel to access the wheel well
    • Peel back the splash shield near the headlight and remove the 10mm nut beneath
    • Remove the 10mm self-tapping screw on the front of the bumper
    • Repeat the process on the other side
    • Remove the 10mm screws underneath the bumper on the splash shield
    • Pull down the shield
    • Pry out the push clips from the splash shield
    • Pull out the bumper cover and remove it with an assistant
  2. step : Removing the Headlight (4:08)
    • Remove the 10mm bolts from the headlight
    • Pull the headlight out
    • Disconnect the headlight wiring harness
  3. step : Installing the New Headlight (7:04)
    • Install the new grommet if needed
    • Reconnect the wiring harness to the headlight
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts into the headlight
    • Test the headlights
  4. step : Installing the Bumper Cover (9:12)
    • Lift the bumper cover over the impact foam and into the clip underneath the headlamp
    • Tighten the 10mm screws into the bumper on both sides
    • Tighten the 10mm screws underneath the bumper on the splash shield
    • Press in the clips to the splash shield
    • Press on the six clips to the top of the grille

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2006Nissan Altima Nissan Altima Pair with Bulbs & Ballast Headlight HID (High-Intensity Discharge) SE-R
Only 1 left in stock
Part #: 1ALHP01097


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:36 min)