This replacement tail light is just what you need to get your Hyundai Elantra in good looking form again!

This tail light features the following specifications:

  • LH (Passenger side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Does not fit hatchback models

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation tail lights. Go with superior quality!

This light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Taillight (0:46)
    • Twist off the two thumbscrews from the taillight cover by hand
    • Pull off the taillight cover
    • Remove the three 8mm nuts from the taillight
    • Disconnect the taillight wiring harness
    • Push the taillight wiring grommet through its cavity
    • Pull the taillight off
  2. step : Servicing the Taillight Bulbs (1:35)
    • Twist the top socket counterclockwise out of the taillight
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
    • Twist the top socket clockwise into the taillight
    • Twist the second socket counterclockwise out of the taillight
    • Twist the bulb out of the socket
    • Twist the new bulb into the socket
    • Twist the second socket clockwise into the taillight
    • Twist the inside socket counterclockwise out of the taillight
    • Pull the bulb out of the socket
    • Push the new bulb into the socket
    • Twist the inside socket clockwise into the taillight
    • Twist the outside socket clockwise into the taillight
    • Twist the second socket counterclockwise out of the taillight
    • Twist the bulb out of the socket
    • Twist the new bulb into the socket
    • Twist the outside socket clockwise into the taillight
  3. step : Installing the New Taillight (2:10)
    • Feed the wiring through its cavity
    • Push the taillight into place using the locating pin
    • Pull the wiring until the grommet comes through its cavity
    • Connect the taillight wiring harness
    • Fasten the three 8mm nuts onto the taillight
    • Put the taillight cover on
    • Insert the two thumbscrews into the taillight cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2006 Hyundai Elantra Sedan Tail Light Passenger Side

This part replaces:

  • Partslink HY2801130
  • Hollander 166-59652R
  • OE # 924022D550
  • TYC 11-6017-00
  • DEPO 321-1936R-AS
Only 2 left in stock
Part #: 1ALTL00440


Order must be placed by 4pm ET

How-to Video:

(03:55 min)