Replaces

2002-06 Nissan Altima Strut & Spring Assembly Pair - 1ASSP00151

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:51)
    • Loosen the lug nuts with your 19 mm socket and breaker bar
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the struts (1:13)
    • Hit the bolts at the bottom of the strut with penetrating oil.
    • Remove the stabilizer link using a 19 and 17 mm socket and ratchet on either side.
    • Unclip the ABS line.
    • Remove the two 19 mm nuts securing the bottom of the strut.
    • Unbolt the three 14 mm nuts at the top of the strut in the engine bay.
    • Pull your strut out.
  3. step : Install the new strut (3:02)
    • Line up the new strut and thread the three 14 mm nuts on.
    • Slide the bottom of the strut into place and thread in the two bolts.
    • Torque the 14 mm nuts to 35 ft lbs.
    • The 19 mm bolts should be torqued to 85 ft lbs.
    • Replace the stabilizer link using your sockets and ratchets.
    • Clip the ABS line to the strut.
  4. step : Replace the wheel (5:20)
    • Put the wheel back on.
    • Thread on the lug nuts.
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 19mm Socket
  • 21mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Quick & Easy.
I replaced the shocks on my 2006 Altima and got the original ride quality back. The instillation was easy and any questions I had were answered in the video.
April 24, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 18 answers
can I use these for the 2.5?
Bryan o on Mar 22, 2017
BEST ANSWER: Also, Bryan you can see in the awesome instruction video provided by 1aauto that are replacing the strut and spring assembly on a 2.5. Good luck with your install.
is this a quick strut ready to install?
Bryan o on Mar 22, 2017
BEST ANSWER: Yes, search for the accompanying YouTube video as it gives a very good demonstration of the replacement. The hardest part for me was breaking the bolts that are torqued to 100ft-lbs.
Is it the right and left side strut assembly ?
Jose R on Nov 9, 2017
BEST ANSWER: Yes. This is the assembly we ordered and worked very well.
Who is the manufacturer and does it make a difference if my car is the 3.5 SL not the 3.5L?
Morales on May 9, 2018
BEST ANSWER: Leacree is the manufacturer and I believe there is no difference if the car is 3.5 SL or 3.5L. I replaced it almost a year and there is no problem while driving. If you don't want a high performance and paying high dollars name brand or even save you time installing, then you can replace with this strut & spring assembly plus no hassle with spring compressor. Just make sure before you put on it match with the old one for the bolt bracket welded on each side to mount into the frame.

Vehicle Fit

Year Make Model Description
2002-2006Nissan Altima Nissan Altima Front Strut & Spring Assembly Pair V6 3.5L

This part replaces:

  • Monroe 171427
  • Monroe 171426
  • KYB SR4164
  • KYB SR4163
Part #: 1ASSP00151


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:55 min)