Replaces

2002-04 Honda Odyssey Brake Rotor Rear Pair Nakamoto 31317 - 1ABFS00452

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear
  • Rear Brake Rotor Specifications:
      Solid
      12.32" (313mm)
      5 Lug

These rear brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part number: 42510-S0X-A00, 42510S0XA00
  • Fits 5 Lug Wheels
  • Solid (not Vented) Rotors

These rear brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove two 12mm bolts from the brake caliper
    • Pull the caliper toward the outside of the vehicle to push in the piston
    • Pull the caliper aside
    • Pull the brake pads out of the bracket
  3. step : Removing the Brake Rotor (2:15)
    • Remove the 14mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Loosen the rotor screws with a hammer and impact driver
    • Remove the screws
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:34)
    • Slide the rotor on
    • Insert the rotor screws
    • Remove the rubber plug from the old rotor
    • Push the rubber plug into the new brake rotor with a screwdriver
    • Clean the bracket slides with a wire brush
    • Check that the bolt slides move freely
    • If necessary, clean and grease the bolt slides
    • Put the bracket back into place
    • Start the 14mm bolts by hand
    • Tighten the bolts to 45 foot-pounds of torque
  5. step : Installing the New Brake Pads (5:19)
    • Install the new brake pads into the bracket
    • Use a large C-clamp to push the piston back
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten bolts to 20 foot-pounds
  6. step : Reattaching the Wheel (6:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (7:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Hammer
  • Floor Jack
  • Large C-Clamp
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 14mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2004Honda Odyssey Honda Odyssey Rear Brake Rotor Pair Nakamoto
Part #: 1ABFS00452


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: 31317

How-to Video:

(08:03 min)