2002-03 Nissan Maxima Tail Light - 1ALTL00335

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement tail light is just what you need to get your Nissan Maxima in good looking form again!

This Nissan tail light features the following specifications:

  • LH (driver's side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Built to strict quality control standards
  • Does not include bulbs or wiring
  • Red,amber, white, and clear in color
  • Fits all models

We have noticed that there are many inferior quality Tail lights on the market. We have researched other tail light manufacturers and are only selling what we believe to be the highest quality, best fitting, aftermarket tail lights available. So don't be fooled by cheaper made imitation Tail lights. Go with superior quality!

This Nissan Maxima tail light makes a great replacement and has good cost savings over a dealer unit.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the tail light assembly (0:49)
    • Pop the trunk.
    • Pull up and unclip the plastic cover on the lip of the inside of the trunk.
    • Use a flat blade screwdriver to pry up the push clips securing the upholstery.
    • Pull back the upholstery covering the back of the tail light assembly.
    • Unclip the wiring harness from the studs and unbolt the 8 mm nuts underneath.
    • Remove the rest of the 8 mm nuts, leaving the 10 mm bumper cover nuts alone.
    • Disconnect your wiring harness.
    • Push out the tail light.
    • Unplug the bulbs.
  2. step : Install the new tail light assembly. (2:45)
    • Line up the studs and clip the tail light into place.
    • Plug in your wiring harness and secure the tail light.
    • Bolt it into place with your 8 mm wrench.
    • Clip the wiring harness back into place.
    • Put the upholstery back and secure with the push clips.
    • Clip the plastic cover back onto the inner trunk lip.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2002-2003Nissan Maxima Nissan Maxima Tail Light Driver Side
Part #: 1ALTL00335

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:14 min)