Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:
  • RH (Passenger Side)
  • Includes lens, housing, and mounting panel
  • Includes integrated parking/marker lamp
  • Replaces dealer part number: YL8Z-13008-FA, YL8Z13008FA
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

    DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulbs (0:50)
    • Pop the hood and secure.
    • Reach behind the headlight assembly and remove the rubber boot and pull away the retaining wire
    • Remove the bulb and unplug the harness
    • Reverse the process to install new bulbs
  2. step : Remove the front bumper cover (3:00)
    • Use a 10 mm socket and ratchet to remove the front bumper cover.
    • Disconnect your fog lights if you have them.
    • Remove the bumper cover and set aside.
  3. step : Remove the headlight assembly (7:00)
    • Remove the four 10mm bolts securing the headlight assembly
    • Unplug the bulbs and harness.
  4. step : Install the new headlight assembly (9:00)
    • Plug in the bulbs and harness
    • Bolt the headlight assembly in using your 10 mm socket and ratchet.
  5. step : Install the bumper cover (10:23)
    • Plug your fog lights back in if you have them
    • Secure your bumper cover by replacing all the push clips and bolts.
    • Close your hood and enjoy your new 1A Auto headlights.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2004Ford Escape Ford Escape Headlight Passenger Side
Part #: 1ALHL00176


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:50 min)