Specifications

  • Left Hand (Driver Side)
  • Includes lens, housing, and integrated parking/marker lamp
  • Bulbs not included

Fit guaranteed

  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.

Quality

  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.

Value

  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.

Safety

  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather..
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : To replace just the headlight bulbs (1:28)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Pull aside the rubber boot and unclip the retaining wire.
    • Remove and replace the bulb.
    • Anchor it with the retaining wire and seal it in with the rubber boot.
  2. step : Remove the front bumper cover (2:57)
    • Remove the pushclips on the top and bottom of the bumper cover
    • Unbolt the 8mm bolts under each wheel well with your ratchet and socket.
    • Pull off the bumper and set aside.
  3. step : Remove the headlight assembly (5:48)
    • Unbolt the three 10mm bolts
    • Pull out the headlight assembly and unplug the wiring harness and bulbs.
  4. step : Install the new headlight assembly (7:20)
    • Plug in the bulbs and wiring
    • Bolt the headlight assembly into place
    • Clip the bumper cover back on and bolt in the two 8mm bolts.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2003 Honda Civic Sedan Headlight Driver Side

This part replaces:

  • OE # 33151S5AA01
  • Partslink HO2502116
  • Hollander 114-58797L
  • TYC 20-5950-00-1
  • DEPO 317-1119L-AS
Part #: 1ALHL00479

How-to Video:

(12:34 min)