2000-03 Mercury Sable Tail Light Pair - 1ALTP00242

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

This replacement Mercury Sable tail light pair is just what you need to get your Mercury in good looking form again!

This tail light features:

  • Driver and Passenger Side
  • Mounts on 1/4 panel
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Direct replacement
  • Built to strict quality control standards
  • Bulbs and wiring not included

This Mercury Sable tail light set makes a great replacement and has good cost savings over a dealer unit.



Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight (0:18)
    • Remove the thumb screw.
    • Pull the trim panel up and push the insulation forward.
    • Remove the four 11mm nuts on the back of the taillight.
    • Disconnect the harness.
    • Push the plug out.
    • Pull the taillight out and off.
  2. step : Changing a Bulb (1:51)
    • Twist the socket out counterclockwise.
    • Pull the bulb out.
    • Push a new bulb in.
    • Twist the socket clockwise to lock.
  3. step : Replacing the Taillight (2:17)
    • Twist out the sockets and remove the harness from the old taillight.
    • Twist the sockets into the new taillight.
    • Push the harness and plug into place.
    • Line up the taillight and push it into place.
    • Connect the harness.
    • Replace the four 11mm nuts.
    • Put the insulation and trim panel back into place.
    • Replace the thumb screw.

Tools needed for replacement:

    Wrenches - Metric

  • 11mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2003Mercury Sable Mercury Sable Tail Light Pair (excluding Wagon)
Part #: 1ALTP00242

Out of Stock

How-to Video:

(04:21 min)