Replaces

1999-04 Ford Mustang EGR Valve & Tube Kit - 1AEEK00537

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement egr and tube kit is just what you need to get your emissions in good working order again! Anyone who has tried to replace an old EGR valve knows the problems that come with trying to replace them!

Over time from the hot and cold cycles of the engine and corrosive exhaust gases running through the egr tube, will cause the egr pipe to rust so badly that the tube will crumble in your hands if you try to move it. Also, many times when the EGR valve is replaced, these tubes are either frozen to the valve or the exhaust manifold making it impossible to remove them without twisting and breaking them off.  Now you can get both together to save time, money, and hassle!

Specifications:

  • Brand New EGR Tube & EGR Valve
  • Replaces dealer part number: XR3Z-9D477-EA, F75Z-9D475-DA, F75Z9D475DA, XR3Z9D477EA
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with V8 4.6L SOHC Engine - (8th VIN Digit "X")

This EGR valve and tube makes a great replacement and has good cost savings over the dealer units!

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Engine Cover (0:40)
    • Remove the two 11mm nuts from the engine cover
    • Lift the engine cover and unclip the hose on the back
  2. step : Removing the EGR Valve (1:08)
    • Remove the hose from the EGR valve
    • Loosen the nut on the valve with a 1 1/16" wrench
    • Remove the two 10mm bolts from the EGR valve
    • Remove the EGR valve
    • Pry off the gasket if necessary
  3. step : Installing the New EGR Valve (2:17)
    • Insert the gasket onto the EGR valve
    • Thread the bolts through the valve and insert it into place
    • Tighten the 10mm bolts to the EGR valve
    • Tighten the nut with a 1 1/16" wrench
    • Insert the hose to the EGR valve
  4. step : Reinstalling the Engine Cover (2:53)
    • Insert the engine cover into place
    • Clip in the hose to the back of the engine cover
    • Tighten the 11mm nuts to the engine cover

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 1-1/16 Inch Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Ford Mustang Ford Mustang EGR Valve & Tube Kit V8 4.6L SOHC (8th Vin Digit X)
Only 1 left in stock
Part #: 1AEEK00537


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:29 min)