Replaces

1992-96 Toyota Camry Exterior Door Handle Pair - 1ADHS01460

These replacement door handles are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side) REAR 
  • Dark Green (factory color code 6M1) Painted Finish
  • Replaces dealer part number: 69230-32041-C1, 69230-33010, 69240-33010, 69240-32041-C1, 6923032041C1, 6923033010, 6924033010, 6924032041C1
  • Reinforced from the original design
  • Plastic construction

NOTE: This color is an exact match for the original factory color.  Due to things such as UV rays, weather, and age, your vehicle's paint may have faded since it was first painted.

This pair makes a great replacement and provides a good value.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (0:55)
    • Pry up the door latch bezel with a flat blade screwdriver.
    • Do the same to the switch panel.
    • Unplug the switch panel from the wiring harness.
    • Use a Phillips screwdriver to remove the screws in the door pull.
    • On the edges of the door panel, remove the push clips by depressing the center and pulling the body of the clip out.
    • Pull the door panel off, lifting it up over the lock and door latch.
  2. step : Remove the door handle (3:05)
    • Carefully pull back the water shielding.
    • Disconnect the door handle by prying the rods off the pin connecting them to the inner door latch.
    • Use a screwdriver to remove the lock mechanism.
    • Pry out the child lock knob with a flat blade screwdriver.
    • Remove the two 10 mm bolts securing the door handle.
    • Pull the door handle out.
  3. step : Install the new door handle (5:30)
    • Clip the door handle into the door.
    • Reconnect the latch and lock rods.
    • Bolt the door handle into the door with your 10 mm socket and driver.
    • Secure the locking mechanism with the Phillips screws and driver.
    • Snap the child lock knob back in.
    • Reconnect the latch and lock rods to the pin connecting them to the inner door latch.
    • Replace the water shield, making sure you have a good seal.
  4. step : Put the door panel back together. (9:00)
    • Thread your wiring harness through the switch panel hole.
    • Clip the door panel on, securing with the push clips.
    • Depress the body of the clip and push in the center to anchor them.
    • Screw in the two Phillips screws in the door pull.
    • Reconnect the wiring harness to the switch panel.
    • Clip the switch panel and the door latch bezel back on.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:42 min)

Tools List:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket




Vehicle Fit

  • 1992-1996 Toyota Camry Rear Dark Green Exterior Door Handle Pair
Only 2 left in stock
Part #: 1ADHS01460

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More