Replaces

1999-2004 Chrysler 300M Power Window Regulator with Motor Rear Passenger Side

Part Details

  • Window Options: with Motor
  • Operation: Power
  • Front / Rear Location: Rear
  • Side Location: Passenger Side

This part replaces:

  • DORMAN 741-559
  • HOLLANDER 135-01792R 135-01851R
  • OE # 4574100AH 4574100AR

  • New

This replacement power window regulator with motor is just what you need to get your Chrysler & Dodge Full Size Car in good shape again!

This power window regulator with motor features the following specifications:

  • RH (passenger's side) REAR DOOR
  • Replaces dealer part numbers: 4574100AG, 4574100AH, 4574100AL, 4574100AN, 4574100AQ, 4574100AR, 5012546AA, 5012546AB, 5012547AB
  • Power operation
  • Direct replacement
  • Includes power window motor already assembled to regulator
  • Built to strict quality control standards

This Chrysler & Dodge Full Size Car power window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Installation

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note: This High Quality power window regulator is a new aftermarket replacement part that is built to strict quality control standards. It is far superior to the lower quality window regulators which have begun to appear on the internet. Although this window regulator is produced overseas, it was designed in the U.S. and the tooling is owned by a large U.S. manufacturer. That is why we guarantee this high quality window regulator with a superior warranty! If price is your main concern, we do offer the lower price overseas designed and built window regulator in our other listings.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Removing the Door Panel (0:56 in the video)
    • Pry up the screw cover inside the door handle with a flat blade screwdriver
    • Pry up the screw cover inside the door pull with a flat blade screwdriver
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Remove the three Phillips screws from the bottom of the door panel
    • Pry off the window trim piece with a flat blade screwdriver
    • Pry off the door panel
    • Pull the door panel up and off
    • Unclip the lock rod from the door handle
    • Disconnect the window switch wiring harness
    • Pull out any door panel clips that remained in the door with needle nose pliers
    • Insert those clips into the door panel
    • Carefully peel off the water shield
  2. Removing the Window Regulator (3:35 in the video)
    • Remove the two 10mm bolts from the regulator bracket
    • Remove the two 10mm bolts from the window track
    • Slide the track back and off the window
    • Secure the window with painter's tape
    • Disconnect the window motor lead
    • Collapse the regulator and pull it out of the door
  3. Installing the New Window Regulator (6:58 in the video)
    • Transfer the bolts from the old regulator to the new regulator
    • Put the new regulator into the door
    • Hang the regulator by its bolts
    • Tighten the regulator bolts
    • Connect the window motor lead
    • Connect the window switch wiring harness
    • Turn the vehicle on
    • Lower the regulator with the switch
    • Turn the vehicle off
    • Disconnect the window switch wiring harness
    • Remove the painter's tape from the window
    • Slide the window down into the track
    • Tighten the two 10mm bolts into the window track
    • Put the regulator bracket into place
    • Insert the two 10mm bolts into the regulator bracket
  4. Reinstalling the Door Panel (11:34 in the video)
    • Connect the lock rod to the door handle
    • Connect the window switch wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw into the door pull
    • Put on the screw cover inside the door pull
    • Insert the Phillips screw inside the door handle
    • Put on the screw cover inside the door handle
    • Insert the three Phillips screws at the bottom of the door panel
    • Push on the window trim piece
    • For more detailed instructions, please see the 2004 Intrepid door panel replacement video

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

How-to Video:

(12:20 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • DORMAN 741-559
  • HOLLANDER 135-01792R 135-01851R
  • OE # 4574100AH 4574100AR

Vehicle Fit

  • 1999-2004 Chrysler 300M Power Window Regulator with Motor Rear Passenger Side
  • 1998-2004 Chrysler Concorde Power Window Regulator with Motor Rear Passenger Side
  • 1999-2001 Chrysler LHS Power Window Regulator with Motor Rear Passenger Side
  • 1998-2004 Dodge Intrepid Power Window Regulator with Motor Rear Passenger Side
$61.45
Save 66%
List: $179.00 Save: $117.55
Part #: 1AWRG00904

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est