Replaces

2005-2005 Saturn Relay Front Wheel Bearing & Hub Assembly Pair

Part Details

  • Front / Rear Location: Front
  • Quantity: Pair

  • New

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Triangular Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 7467357, 7467587, 12413093, 12413094, 12413125, 12413126, 12413194, 88964168
  • Wheel studs already installed
  • Direct replacements
  • Fit models with ABS (Anti-Lock Brakes) only
  • Include ABS sensors with correct plugs

NOTE: For models requiring RPO Codes: Brake option JL9: 4 Wheel Disc Brakes with 4 Wheel Anti-Lock Brakes. Brake option JA9: Heavy-Weight (Heavy Duty) Disc Brakes.

2 Year Warranty

This item is backed by a 2 Year Warranty. In the event this item should fail during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
All was as described and expected
September 26, 2013
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:37 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket




Vehicle Fit

  • 2005-2008 Buick Allure Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009 Buick Allure Front Wheel Bearing & Hub Assembly Pair
  • 2005 Buick Century Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2005-2008 Buick LaCrosse Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009 Buick LaCrosse Front Wheel Bearing & Hub Assembly Pair
  • 2006-2011 Buick Lucerne Front Wheel Bearing & Hub Assembly Pair
  • 2005 Buick Terraza Front Wheel Bearing & Hub Assembly Pair
  • 2006-2011 Cadillac DTS Front Wheel Bearing & Hub Assembly for Models with ABS Brake Option JL9 Pair
  • 2005 Chevy Impala Front Wheel Bearing & Hub Assembly for Models with ABS HD Brake Option JA9 Pair
  • 2006-2008 Chevy Impala Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2009-2013 Chevy Impala Front Wheel Bearing & Hub Assembly Pair
  • 2005 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly for Models with ABS HD Brake Option JA9 Pair
  • 2006-2007 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2005 Chevy Uplander Front Wheel Bearing & Hub Assembly Pair
  • 2004-2005 Pontiac Bonneville GXP Front Wheel Bearing & Hub Assembly Pair
  • 2004-2008 Pontiac Grand Prix Front Wheel Bearing & Hub Assembly for Models with ABS Pair
  • 2005 Pontiac Montana SV6 Front Wheel Bearing & Hub Assembly Pair
  • 2005 Saturn Relay Front Wheel Bearing & Hub Assembly Pair
$103.95
Save 62%
List: $274.92 Save: $170.97
Part #: 1ASHS00099

Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

1A Auto Parts

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est