Replaces

Water Pump - 1AEWP00026

This part replaces:

  • HOLLANDER 324-00890
  • OE # 3L3Z 8501 CA

  • New

This water pump is a new replacement part that has the following specifications.

Specifications

  • New not remanufactured
  • Replaces dealer part numbers: 3L3E8501CA, 3L3E 8501 CA, 3L3E8501AA, 3L3E 8501 AA, 5L3E8501AB, 5L3E 8501 AB, F65E8501BA, F65E 8501 BA, F65E8501BB, F65E 8501 BB, F6TE8501JB, F6TE 8501 JB, F6TE8501JB, F6TE 8501 JB, XL3E8501AA, XL3E 8501 AAYC2E8501AB, YC2E 8501 AB, YC2E8501BA, YC2E 8501 BA
  • Built to strict quality control standards
  • No core charge
  • Includes gasket
  • Fits the following Ford engines as listed as listed per application:
    • V8 4.6L
    • V8 5.4L
    • V8 5.4L (FLEX FUEL)
    • V8 5.4L (SUPERCHARGED)

Your water pump is a major component of your engine cooling system. If the water pump fails, the engine will overheat causing it to shut down. Water pumps have an indicator that tells you when they are going bad. There is a small hole in the water pump right under the shaft in the middle that the pulley bolts to. As the water pump's bearings wear out coolant seeps by them and leaks through this hole. If you notice a few drops of coolant under the front of your engine this is an indicator your pump is failing. If a water pump fails it will cause engine overheating, and possibly further engine damage. If you have noticed little drops of coolant under the front of your vehicle then inspect the bottom of the water pump to see if it is dripping out of the indicator hole. If your water pump is the problem, then this part is for you. Replace your broken or leaking water pump now with this great fitting replacement part.

Lifetime Warranty

Effective June 23, 2014: This item is backed by a manufacturer's Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. Step 1: Drain the Radiator
    • Put a catch pan under the radiator.
    • Use a wrench to open the valve and drain the radiator.
    • Replace the cap.
    • Put the catch pan under the middle front of the engine.
  2. Step 2: Remove the Serpentine Belt
    • Insert the ratchet into the tensioner.
    • Push clockwise on the tensioner and remove the belt from the alternator.
    • Slowly release back on the tensioner.
    • Remove the belt from the water pump pulley and set it aside.
  3. Step 3: Remove the Cooling Fan
    • Place a belt wrench on the cooling fan pulley.
    • Use an adjustable wrench on the large bolt holding the fan.
    • Remove the fan.
  4. Step 4: Removing the Water Pump
    • Place the belt wrench on the water pump pulley.
    • Remove the four 10mm bolts securing the pulley.
    • Use a flat blade screwdriver to pry from the back of the water pump pulley. Turn it and continue to pry till it comes off.
    • Remove the four 10mm bolts securing the water pump.
    • Use a hammer to hit the side of the water pump shaft. When it starts to separate use a flat blade screwdriver to help get the pump free.
    • Use a sponge and wire brush to clean up the area.
  5. Step 5: Installing the New Water Pump
    • Put penetrating oil on the water pump.
    • Line it up and push it into place.
    • Replace the four 10mm bolts. Hand tighten each of them and work your way around. Tighten incrementally. Then tighten them to 19ft/lbs.
    • Replace the pulley and replace the four 10mm bolts. Tighten to 20ft/lbs.
    • Turn the cooling fan back in to place and replace the bolt.
    • Replace the belt around the crankshaft.
    • Loosen the tensioner.
    • Put the belt over the alternator.
    • Tighten the tensioner.
    • Make sure the belt is properly in place.
  6. Step 6: Refilling the Antifreeze
    • Fill the truck back up with antifreeze.
    • Start the vehicle to circulate the antifreeze.
    • Fill the antifreeze back to the line.
    • Drive the vehicle.
    • Let it cool then fill to the line again.

How-to Video:

(14:09 min)

Tools List:

    Materials, Fluids, and Supplies

  • Sponge

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Belt Wrench
  • Drain Pan
  • Hammer
  • Wire Brush



This part replaces:

  • HOLLANDER 324-00890
  • OE # 3L3Z 8501 CA

Vehicle Fit

  • 2000-2013 Ford E150 Van Water Pump for V8 4.6L
  • 2000-2013 Ford E250 Van Water Pump for V8 5.4L
  • 2003-2013 Ford E250 Van Water Pump for V8 4.6L
  • 2000-2013 Ford E350 Van Water Pump for V8 5.4L
  • 2002-2013 Ford E450 Van Water Pump for V8 5.4L
  • 2000-2005 Ford Excursion Water Pump for V8 5.4L
  • 1997-2009 Ford Expedition Water Pump for V8 5.4L
  • 1997-2004 Ford Expedition Water Pump for V8 4.6L
  • 2004 Ford F150 Heritage Truck Water Pump for V8 5.4L
  • 2004 Ford F150 Heritage Truck Water Pump for V8 4.6L
  • 1997-2008 Ford F150 Truck Water Pump for V8 4.6L
  • 1997-2010 Ford F150 Truck Water Pump for V8 5.4L
  • 1999-2003 Ford F150 Truck Lightning Water Pump for V8 5.4L
  • 1997-1999 Ford Water Pump for V8 4.6L
  • 1997-1999 Ford Water Pump for V8 5.4L
  • 1999-2008 Ford F250 Super Duty Truck Water Pump for V8 5.4L
  • 1999-2008 Ford F350 Super Duty Truck Water Pump for V8 5.4L
  • 2003-2005 Lincoln Aviator Water Pump for V8 4.6L
  • 2002 Lincoln Blackwood Water Pump for V8 5.4L
  • 2006 Lincoln Mark LT Water Pump
  • 1998-2009 Lincoln Navigator Water Pump
$45.45
Part #: 1AEWP00026

- Ships Same Day for orders placed by 5 P.M. ET

Free GROUND SHIPPING

Check Shipping Rates

We're here to help

Customer Feedback

Customer Feedback
"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More
Free Shipping!
OR
CALL
TOLL
FREE

888-844-3393

hablamos Español:866-401-3393
SHIPS SAME DAY
For Orders Placed By 5pm Est