2006 Dodge Dakota 4 Wheel Drive Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171100MNSSP00529-673835-2006
Guaranteed to Fit
2006 Dodge Dakota
- Vehicle Drivetrain Configuration: 4 Wheel Drive
- Front / Rear Location: Front
- Quantity: Pair
- Product Line: Monroe Quick-Strut
This part replaces:
- Monroe 171100
Monroe® Quick Strut Assemblies: 171100
These are new MONROE strut and spring assemblies. We recommend replacing struts in pairs and performing an alignment after replacement.
Quantity: (2) Strut & Spring Assemblies
Side: Both LH (Driver Side) & RH (Passenger Side)
Vehicle Type: 4WD (Four Wheel Drive) Models only
Engine Size: All
Built to strict quality control standards:
Quick and easy... remove and replace one piece! No need to take apart entire assembly. No need to compress coil springs. Do the complete job right the first time. Enhances the handling, safety and performance of your vehicle.
Include the following preassembled components:
- Upper Mount
- Upper Spring Isolator
- Upper Spring Seat
- Coil Spring
- Boot Kit
- Lower Spring Isolator
- Premium Strut
The revolutionary Monroe Quick-Strut unit is the first complete, ready-to-install replacement strut assembly available! Monroe Quick-Strut units include all the components required for strut replacement in a single, fully-assembled unit. They feature pre-assembled replacement upper mount, upper and lower spring isolators, upper spring seat, coil spring, boot kit, and a premium strut. This breakthrough design saves on installation time by eliminating having to disassemble components and compress the coil spring prior to installation. Each Quick-Strut assembly features application-engineered valving to optimize each vehicle's unique ride and handling characteristics.
In the past, replacing struts required specialized tools to compress, remove and transfer the spring. Our new strut and spring assemblies make this job much simpler for the do it yourself mechanic. This part comes pre-assembled. Jack up and support the vehicle with jack stands. Remove the wheel. Unbolt the top mounts and the bottom from the suspension and replace the whole unit. The large bottom bolts usually require an impact wrench and socket for removal. When reassembling, be sure to torque all nuts and bolts to their proper specifications. Do not use impact tools when reassembling.
- 2005-2009 Dodge Dakota 4 Wheel Drive Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171100
- 2006-2009 Mitsubishi Raider 4 Wheel Drive Front Strut & Spring Assembly Pair (Monroe Quick-Strut) Monroe 171100
Part #: MNSSP00529
Ships Same Day for orders placed by 5 P.M. ET
Free GROUND SHIPPINGCheck Shipping Rates
Brand #: 171100